Want this question answered?
WHY THE MAX 600 CU :The fuel conductivity cannot be increased above a certain limit (300-600 pS/m), since extremely high conductivities would have an adverse effect on the accuracy of the readings of capacitance-type fuel gases installed in storage tanks and aircraft tanksG S ALEXANDERMANAGER - QC HPCLgsalex@hpcl.co.in
Jet fuel have low conductivity
When they run out of thermonuclear fuel in their cores. What fuel this would be varies, as more massive stars can fuse heavier elements. The absolute upper limit is iron, as fusing it absorbs energy.
A load limit governor is a device that is controls the amount fuel that goes to the engine. This ensures that the amount of fuel that goes into the engine is not above the specified limit.
Upper-end cars use Premium fuel
sorry it is not.
Not normally, however there are still a few Federal TAX CREDITS for tax year 2012.30% tax credits on huge energy installation projects that are geared towards environmental die-hards:geothermal heat pumps (no upper limit, both principal residences & second homes apply)solar energy systems (no upper limit, both principal residences & second homes apply)small wind turbines (no upper limit, both principal residences & second homes apply)fuel cells (up to $500 per .5 kW of power capacity. Principal residences only)
Inside the upper intake manifold, attached to the fuel injection spider.
under the upper plenum of the intake manifold it is round and is bolted to the fuel line and has a vaccum line attached to it. you need to remove the upper plenum to access it
Need to know what engine you have but, if it is a 4.3 V-6 the fuel injectors are located under the upper intake manifold. The upper intake manifold has to be removed to gain access to the fuel injectors.
Under hood, center, upper firewall, mounted in fuel line.
it is part of the fuel injector which is under the upper intake manifold