Semiconductor.
the source current is the current that flows from the power source.
FET stands for Field Effect Transistor. The name FET comes because the gate current of a field effect transistor is zero and current present in the source conductor is due to an electric field produced by the substrate material placed between the gate and the source.
Various FET biasing circuits are as follows: 1. Fixed bias 2. Self bias 3. Potential divider bias 4. Current-Source bias
Zin=Vds/Id [Vds=drain to source voltage ; Id = drain current]
configurations of Common-source (CS), Common-drain (CD) or Source-follower (SF) and the Common-gate (CG) available for most FET devices. These three JFET amplifier configurations correspond to the common-emitter, emitter-follower and the common-base configurations using bipolar transistors.
no difference between emiter follower and source follower
Semiconductor.
the source current is the current that flows from the power source.
fet is a voltage controlled device...cut off voltage in fet refers to that voltage of the gate - source junction at which the current flow through channel is zero
fet is a voltage controlled device...cut off voltage in fet refers to that voltage of the gate - source junction at which the current flow through channel is zero
FET stands for Field Effect Transistor. The name FET comes because the gate current of a field effect transistor is zero and current present in the source conductor is due to an electric field produced by the substrate material placed between the gate and the source.
The small signal model for the common source FET can be used for analysing the basic FET amplifierconfigurations:(i)common source(CS),(ii)commondrain(CD) or source follower,and(iii)common gate(CG). The CS amplifier which provides good voltage amplification is most frequentlyused.The CD amplifier with high input impedance andnear-unity voltage gain is used as a buffer amplifier and the CG amplifier is used as a high frequencyamplifier.The small signal current-sourcemodel for the FET in CS configuration and the voltage source model can be derived by finding the Thevenin'sequivalent for the output part of amplificationfactor,drain resistance andtransconductance/mutual conductance of the FET.
explain all the parameters of fet
Due to high input impedence curret gain is high
Various FET biasing circuits are as follows: 1. Fixed bias 2. Self bias 3. Potential divider bias 4. Current-Source bias
reduce distortion,