No it is not.
the hot wire goes to the starter and the ground wire bolts to the engine block.
No, the hot wire should not be connected to the ground wire in an electrical circuit.
In electrical wiring, the live or "hot" wire is typically brown or red, the neutral wire is typically blue or black, and the ground wire is yellow or green. So, in this case, the brown wire is likely the hot wire, the blue wire is the neutral wire, and the yellow green wire is the ground wire.
If a "hot" wire contacts the "neutral" or ground wire, electrical current flows to the ground.
The term "hot/ground reverse" in electrical systems refers to a situation where the hot wire and the ground wire are connected incorrectly, potentially causing a safety hazard.
Yes, if it is not an insulated wire. If it is bare copper it is always ground. But the hot and neutral wire are also copper, they are just insulated.
Most likely the ground (green) wire is mistakenly connected to hot instead of the hot wire (black) at the breaker panel! Possibly you meant the neutral wire not the ground wire, in that case most likely the neutral (white) wire is mistakenly connected to hot instead of the hot wire (black) at the breaker panel! In either case check all three wires in the breaker panel for that circuit to make sure they are all correctly connected! Black is hot, White is neutral, Green (or uninsulated in some cases) is ground.
No. A ground wire is a non-current carrying conductor and cannot be used for hot or neutral.
Red is hot, black is not.
You have a 3 way switch. Your black wire is the hot wire. Your green wire is the ground wire. Your red and white wires go to the light and other switch. You should have gotten a wiring diagram with your switch.
In standard residential wiring, the black wire is typically the hot wire, regardless of whether it is striped or solid. The white wire is the neutral wire, and the green or bare wire is the ground wire. It is important to consult a professional electrician or local electrical codes for specific wiring configurations.
Negative - (Black) is Ground, Positive + (Red) is Hot. Ground wire goes to Negative (Black) it goes from negative on battery to engine for ground.