0
What else can I help you with?
Is Belfast noisy?
It is not particularly noisy. It is no more or less noisy than any city.
What is a mosfet amplifier?
what is a mosfet amplifier
Why mosfet is called mosfet?
MOSFET is an acronym standing for Metal Oxide Semiconductor Field Effect Transistor.
Can depletion mosfet act as enhancement mosfet?
It depends. A depletion MOSFET can be used as an ehancemnet MOSFET when it is operated as an analog amplifier. However, a depletion MOSFET can't replace an enhancement MOSFET when it is operated as a digital switch. When a depletion MOSFET is used as a digital switch, since the junction between source terminal and substrate must be reverse biased, the voltage of the source terminal of an N typde transistor must be tied to Vdd, and it is completely opposite to an enhancement MOSFET. When a depletion MOSFET is used as an analog amplifer, the source terminal and the substrate are both at the same potential, just like an enhancement MOSFET.
What is normally-On MOSFET?
Depletion mode MOSFET is normally on device --vlsijp
What are the advantages of mosfet?
mosfet base power inverter of advantages and disaadvantages
How do you make lawn tools less noisy?
remove muffler
Construction of mosfet in depletion region?
To make a depletion MOSFET, the channel must be doped with carriers; this is in total opposite to an enhancement MOSFET which avoids carriers in the channel at all cost. (because the carriers in the channel become the subthreshold leakage current) Since you need to pinch the channel against the substrate to guarantee to turn off the channel completely, there must be a reverse bias between the substrate and the source terminal. As a result, the source terminal of an N type depletion MOSFET must be tied to Vdd. This is also a complete opposite to enhancement MOSFET. In order to turn off the channel quickly, the carriers in the channel of depletion MOSFET are usually planted shallowly. This is a drastically different from enhancement MOSFET that carriers must be planted deeply into source terminal in order to support a large diffuse current. The construction of depletion MOSFET thus requires far less diffusion time than enhancement MOSFET.
The main factor which differentiate a de mosfet from an e only mosfet is the absence of?
conductiong channels
What are the salient features of dynamic RAM?
The dynamic memory is formed of MOSFET and capacitor only. Hence it it is less bulkier than static RAM.
Is it possible to make the inverter with p-channel MOSFET?
Of course it is possible to make an inverter with a p-MOSFET!
How do you keep mosfet from overheating i use only mosfet and control it using variable resistor it works but it gets overheated and brokedown.My battery operated scooter is 24v dc 72 amp.thank you.?
Use a mosfet driver instead of a simple resistor. Using a resistor to control the mosfet is a bad idea anyways because you will have terrible control (mosfets are voltage controlled. Take a look at the response curve for your mosfet). If your mosfet is fully on, its ratings may be too low for continuous operation or the power dissipation is too low for the transition between off an on an that is killing your mosfet.
