0
It depends.
A depletion MOSFET can be used as an ehancemnet MOSFET when it is operated as an analog amplifier. However, a depletion MOSFET can't replace an enhancement MOSFET when it is operated as a digital switch.
When a depletion MOSFET is used as a digital switch, since the junction between source terminal and substrate must be reverse biased, the voltage of the source terminal of an N typde transistor must be tied to Vdd, and it is completely opposite to an enhancement MOSFET.
When a depletion MOSFET is used as an analog amplifer, the source terminal and the substrate are both at the same potential, just like an enhancement MOSFET.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is JFET?
JFET = junction field-effect transistor. The transistor design is to restrict/control the current in the channel by expanding or contracting the depletion region, hence the channel cross-section, with a gate signal. The gate is the junction in JFET, compared with using oxide in an MOSFET.
What is depletion region in PN junction?
when the p type semi conductor is connected to n type the electrons in n type migrates towards p type to fill the vacancy i.e holes in p type. As a result accepter ions are developed in n type and donor ions in p type which restrict further movement of electrons and holes . this layer of donor and accepter ions at the pn-junction is called depletion region. and across this region a potential is developed which is called barrier potential.
What is mean by Matched pair of Transistors?
Two transistors of the same type, {such as two bipolar NPN, or two bipolar PNP, or two enhancement N MOSFET,} which by either manufacture, selection, or both have similar characteristics. The closer the characteristics, the better the match. The most important is input matching, both at 25 degrees C and through the use temperature range. This is perhaps best done by making them together, next to each on a single die. The second most important characteristic for bipolars is Beta (hFE also hfe)), the forward static and dynamic current gain, or for FET's forward transconductance. Breakdown properties are not important as the pair can be rated for the lowest breakdown. Matched transistors are needed for balanced differential stages (normally used for amplifier inputs) and for bridges.
When does anerae brown get out of jail?
he was convicted in 1992, but his sentence should be served in 2026.
Can Justin Bieber act?
Justin Bieber can act. =] he so CAN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
What are the classifications of MOSFET?
MOSFET stands for Metal Oxide Semiconductor Field Effect Transistor, It is broadly Classified into Depletion type MOSFETS and Enhancement type MOSFETS. Depletion type MOSFETS are further classified into P-Channel and N-Channel Depletion type MOSFET, Similarly Enhancement type MOSFETS are further classified into P-Channel and N-Channel Enhancement type MOSFET.
What is the difference between depletion type and enhancement type MOSFET?
bnder
Construction of mosfet in depletion region?
To make a depletion MOSFET, the channel must be doped with carriers; this is in total opposite to an enhancement MOSFET which avoids carriers in the channel at all cost. (because the carriers in the channel become the subthreshold leakage current) Since you need to pinch the channel against the substrate to guarantee to turn off the channel completely, there must be a reverse bias between the substrate and the source terminal. As a result, the source terminal of an N type depletion MOSFET must be tied to Vdd. This is also a complete opposite to enhancement MOSFET. In order to turn off the channel quickly, the carriers in the channel of depletion MOSFET are usually planted shallowly. This is a drastically different from enhancement MOSFET that carriers must be planted deeply into source terminal in order to support a large diffuse current. The construction of depletion MOSFET thus requires far less diffusion time than enhancement MOSFET.
Advantages and disadvantages of depletion MOSFET?
Since the logic operations of depletion MOSFET is the opposite to the enhancement MOSFET, the depletion MOSFET produces positive logic circuits, such as, buffer, AND, and OR. The most significant advantage of the positive logic circuits is that it can produce positive feedback easily so that a single depletion MOSFET can become a memory cell. In contrast, you will need at least two enhancement MOSFET transistor to produce the positive feedback to build a memory cell. The other advantages of depletion MOSFET are that it is free from sub-threshold leakage current and gate-oxide leakage current. Since there is always a potential difference of Vdd between the gate terminal and channel for an enhancement MOSFET to cause the gate-oxide leakage current, the gate oxide leakage current is unavoidable when the transistor shrinks in size and oxide layer becomes thinner. The depletion MOSFET does not have this problem because there is no potential difference between the gate and channel. As a enhancement MOSFET shrinking in size, there is no way to stop the subthreshold leakage current diffused across from source to drain because the drain and source terminals are closer physically. This is not a problem for depletion MOSFET because a pinched channel will stop the diffusion current completely. The depletion MOSFET is the ideal, perfect transistor. The only disadvantage of depletion MOSFET is its inability to produce negative logic operations.
Main factor which differ De mosfet from an e only mosfet?
An e only(enhancement) ÊMOSFET is off at zero gate-source voltage. Meanwhile, a de (depletion enhancement)ÊMOSFET is on at zero gate-source voltage.
What is depletion mosfet?
A depletion mode MOSFET is a FET that is on with no gate bias, and requires a negative bias (with respect to the source) to stop conducting. The channel is normally conductive and with a negative gate bias the channel becomes "depleted" of charge carriers, hence the name depletion mode MOSFET. This is contrary to enhancement type MOSFET's that are non conductive with zero volts gate bias and become conductive when there is a positive bias on their gate.
What are depletion and enhancement mosfet?
A depletion MOSFET is a MOSFET that is normally on. It outputs maximum current when the gate-source voltage is 0V. As the gate-source voltage increases, the drain-source channel becomes more resistive and the current decreases. An enhancement MOSFET has the opposite behavior. It is normally off. It outputs no current when the gate-source voltage is 0V. As the gate-source voltage increases, the drain-source channel becomes less resistive and the current increases.
What is normally-On MOSFET?
Depletion mode MOSFET is normally on device --vlsijp
What transistor can be used in enhancement mode?
MOSFET can be used in enhancement mode
How many kinds of transistor?
germanium - bipolar/darlington?/npn/pnp =4 silicon - bipolar/darlington/thickfilm/thinfilm/npn/pnp =8 J-FET/enhancement/depletion/nchannel/pchannel = 4 MOSFET/enhancement/depletion/nchannel/pchannel = 4 I know of 20 kinds without considering application packaging & frequency (speed).
What happens if a negative voltage is applied to the gate of the n and p channel MOSFET?
It depends on: 1. technology, whether it's a JFET, enhancement-mode IGFET/MOSFET or depletion-mode IGFET/MOSFET, and 2. polarity, whether it's an N type or P type. More info needed for this one.
What is the function of enhancement mosfet?
An enhancement MOSFET doesn't conduct current across the drain to source unless a voltage is applied to the gate. When sufficient voltage is applied to the gate of the transistor, currents flows from drain to source. A MOSFET acts as a switch or amplifier in a circuit.
