0
Possible the motor, but before replacing it remove the wiper arms from the motor itself and then run the wipers, if motor works then check both sides right and Left of the arms rust builds inside making it impossible to move, clean it up and lubricate and test it to see if it works.
What else can I help you with?
Is there a motor in the backdoor of a Pontiac Montana 2001 beside the wiper's what is it?
Just a guess - a pump for the wiper fluid?
Fix for intermittent rear wiper on 2002 Montana?
Sure
How do you replace the wiper blades on 2002 Pontiac Montana?
Very simple there is a huck on wiper just remove and install.
What size is the 2006 Pontiac Montana rear wiper blade?
151,000
Why 1998 Pontiac Montana rear wiper won't stop?
The rear wiper on a 1998 Pontiac Montana may not stop due to a faulty wiper relay, a malfunctioning wiper motor, or a short circuit in the wiring. Additionally, a stuck wiper switch can also keep the wiper activated. Inspecting the wiring and testing the relay and motor can help identify the issue. If needed, replacing the faulty component should resolve the problem.
How to replace a wiper blade on a Pontiac Montana?
To replace a wiper blade on a Pontiac Montana, start by lifting the wiper arm away from the windshield. Locate the release tab on the old wiper blade, press it, and slide the blade off the arm. Align the new wiper blade with the arm, ensuring it clicks into place securely. Finally, lower the wiper arm back onto the windshield and repeat the process for the other side if necessary.
Why does one wiper work and one does not on your 2002 Pontiac Montana?
If one wiper on your 2002 Pontiac Montana works while the other does not, it could be due to a few common issues. The most likely causes are a burned-out wiper motor for the non-functioning side, a broken or disconnected linkage, or a problem with the wiper arm itself, such as a loose connection. Additionally, a blown fuse or a malfunctioning switch could also be contributing to the issue. Inspecting these components should help identify the specific problem.
Where is the wiper fluid reservoir for the rear wiper on a Pontiac Montana?
It's the same resevoir. The hose may be clogged or sediment in the bottom of the resevoir. See if the front still work and hope for the best. The motor for the back might not be working. GOOD LUCK
How do you you reset the wiper motor on a 2002 Montana the wipers stay in the upright position when shut off?
It is definitely a pin inside the wiper motor that is worn out. I just had mine replaced in my 02 Montana. The pin can be seen by removing the cover from the motor.
Escape 01 rear wiper doesn't work?
escape 01 rear wiper dosen't work
What size is the 2003 Pontiac Montana rear wiper blade?
The 2003 Pontiac Montana takes 24" wiper blades on both sides front and a 16" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
What size wiper blades on a 2000 Pontiac Montana?
The 2000 Pontiac Montana takes 24" wiper blades on both sides front and a 16" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
