0
What else can I help you with?
Can you use a 120 volt - 500 watt bulb in a 220 volt lamp?
no , it will burn out
Can you use 220 volt light bulb on 120 volt system - I know the reverse would probably blow the bulb so wouldn't European 220 Volt do ok in 120 volt socket or would it be dimmer than it normally would?
Yes a 220 volt light bulb will run on a 120 volt circuit but at 1/4 of the wattage that the light bulb is rated at. A 100 watt light bulb on 220 would would be equal to a 25 watt light bult on 120 volt system.
What is brighter 60 Watt 110 volt or 60 Watt 220 volt?
If the voltage supplied to the lamps is its operating voltage both lamps will have relatively the same output in brightness. If the 60 watt 110 volt lamp is used on a 220 volt supply, it will glow very brightly and then the lamp's filament will burn open. If the 60 watt 220 volt lamp is used on a 110 volt supply, the lamp will glow at half brightness, but it will last for a very long time before the filament burns open.
The problems of electricity two light bulbs of 100 watt and one 60 watt both operation in a 220V circuit. Which bulb has the higher resistance and which bulb carries the greater current?
A 100 watt 220 volt light bulb (or anything consuming 100 watts on 220 volts) draws 100/220, or .45 Amps. It will also have about 220²/100, or 484 ohms resistance. A 60 watt 220 volt light bulb (or anything consuming 60 watts on 220 volts) draws 60/220, or .27 Amps. It will also have about 220²/60, or 807 ohms resistance.
Can you use a 12 volt bulb instead of a 220 volt?
No.
How many watt of 220 volt will get by convering inverter from 200 Watt 12 volt?
Probably about 180 watts, assuming 90% efficiency.
Does a 220 volt 100 watt cost less to operate than a 110 volt with the same bulbs?
no.
How many amp in 10000 watt 220 volt?
10000 watts / 220 volts = 45.4545 amperes
How much electricity is really used when one 220 voltage 150 watts bulb being plugged in 110 volts supply?
The current through a 220 volt 150 watt bulb is I = W/E = .68 amps. The resistance of that bulb is R = E/I = 324 ohms. The wattage used by the 220 volt bulb when 110 volts is applied W = E(sqd)/R = 37 watts. Half the voltage with the same resistance will quarter the wattage output.
What is the voltage drop on a 220 watt bulb?
To answer this question the systems voltage on the bulb must be known.
Can you repair a Hoover 110 watt after being plugged to 220 watt outlet?
No, plugging a 110-watt device into a 220-watt outlet can cause irreparable damage to the appliance. It is recommended to consult with a professional technician or contact the manufacturer for advice on how to proceed.
How many lumens are in a 34 watt bulb?
The amount of light (Lumens) delivered by a light bulb cannot be determined by it's wattage. Bulbs of any wattage by different manufacturers can have different output (lumens). Everything else being the same, a 34 watt 110volt bulb will put out about half the light than a 34 watt 220 volt bulb, and a 12 volt one will put out about 10% of the light as the 120 volt one will.
