Because it makes the apparatus black when heating
Non-luminous flame should be used for heating in the laboratory because the flame is steady and produce little or no soot.Non-luminous flame is very hot thus, it is recommendable to use for laboratory purposes.Luminous flame is unsteady while non-luminous flame is steady.Another reason of using non-luminous flame because the flame of non-luminous is blue, and not visible unlike the luminous flame which is yellow in colour and visible.
Non-luminous flame should be used for heating in the because the flame is steady and produce little or no soot. Non-luminous flame is very hot thus, it is recommen- dable to use for laboratory purposes. Luminous flame is unsteady while non-lumi- nous flame is steady. Another reason of using non-luminous flame because the flame of non-luminous is blue, and not visible unlike the luminous flame which is yellow in colour and visible.
It produces more heat. It does not produce soot that would stain the laboratory apparatus.
Non luminous zone is the zone of a flame which is also the hottest zone of the flame as it is mostly in contact with oxygen. It is also called invisible zone.
Limited oxygen intake in a lit Bunsen burner will emit a luminous, or yellow, flame. This type of flame is not usually used in the laboratory.
Non-luminous flame should be used for heating in the laboratory because the flame is steady and produce little or no soot.Non-luminous flame is very hot thus, it is recommendable to use for laboratory purposes.Luminous flame is unsteady while non-luminous flame is steady.Another reason of using non-luminous flame because the flame of non-luminous is blue, and not visible unlike the luminous flame which is yellow in colour and visible.
The blue flame is used because it is the hottest.
Non- luminous flame should be used as it is steady and produces little or no soot.
blue flame is more important for laboratory procedures since it's also known as the reducing zone of the flame in which the tip of the blue flame has the highest temperature. and thank you , a Dental student ;D
Non-luminous flame should be used for heating in the because the flame is steady and produce little or no soot. Non-luminous flame is very hot thus, it is recommen- dable to use for laboratory purposes. Luminous flame is unsteady while non-lumi- nous flame is steady. Another reason of using non-luminous flame because the flame of non-luminous is blue, and not visible unlike the luminous flame which is yellow in colour and visible.
A luminous flame
It produces more heat. It does not produce soot that would stain the laboratory apparatus.
Non luminous zone is the zone of a flame which is also the hottest zone of the flame as it is mostly in contact with oxygen. It is also called invisible zone.
So you don't burn yourself. If it's on and you're not paying attention to it, a luminous flame is easily glimpsed in your peripheral vision. If the flame was non-luminous, it's much harder to detect and causes a greater risk. the non-luminous flame also burns much hotter.
-A non-luminous flame is when the air hole of the Bunsen burner is closed but a luminous flame is produced when the air hole is opened.-A luminous flame has an outer of orange colour and an inner of blue. A non-luminous flame has an outer of blue and an inner of orange.-A luminous flame produces soot while a non-luminous does not produce soot.-A luminous flame is weak and unsteady. A non-luminous flame is strong and steady.-A non-luminous flame is very hot while a luminous flame is not too hot.
Limited oxygen intake in a lit Bunsen burner will emit a luminous, or yellow, flame. This type of flame is not usually used in the laboratory.
The laboratory gases undergo complete combustion hence producing more heat.