Want this question answered?
Cause it fills the container/space that its in-eventually. if you look at really old glass you will see that its thicker at the bottom than the top, and it will have little sort of ripples in it. but i mean seriously it takes forever.
Glass is almost completely Silica (silicon dioxide), the naturally occurring form of the element silicon, and is actually a liquid. Look a the bottom edge of an old plate glass window (50 years or older). The bottom will be measureably thicker than the top. This is due to the silica "flowing" downward in response to gravity.
Oil and Grease - Oil for lubrication when its really hot inside your engine. Grease for other lubrication when its cold outside your engine. Adhesives, Silicone Caulks, inhibitors for making wet mount slides for microscopes, Types of glass are also considered to be a highly viscous liquid, as very old windows in 18th century homes have windows whose glass panes are considerable thicker at the bottom than at the top.
tRY YOUR LOCAL AUTO GLASS STORE. The best replacement windows are from BMW. There is a person who sells replacement convertible windows on ebay. I have used his products with success on E30 325ic but never tried his windows for the E36 325. local auto glass buisness was able to cut the old plastic out and instll new plastic, much cheaper than a whole new roof.
Shaving gel is a liquid: it has no crystaline structure; it flows; and it takes the shape of its container (although it doesn't FILL its container, as a gas does). And consider this: Jell-O -- the edible version, not the powder in the box -- is also a liquid, even when it's set! And many people consider glass -- yes, glass! -- to be a "super-cooled" liquid, because it lacks crystaline structure and will, believe it or not, flow, albeit over very long periods of time. Panes of glass in very old windows tend to be thicker at the bottom than the at top because gravity causes the glass to "ooze" downward.
Believe it or not, glass is a liquid, and it moves VERY slowly. Over decades, perhaps more, the glass in windows will succumb to gravity and drip down to the bottom of the windows, pooling up there and making the lower parts of windows slightly thicker as time passes. The older the building is, the more irregularity you will find between the bottoms and tops of its windows. As far as architecture goes, you do not need to worry about the durability of the windows or anything of the sort because of this.
Glass is a solid. Specifically, it is an amorphous solid. The reason that many old panes of glass are thicker at one end is because the medieval glaziers sometimes could not cast perfectly uniform sheets of glass and, for obvious reasons, put the thicker end at the bottom. glass is actually a liquid. older windows tend to be thicker at the bottom than at the top. this is because, though it moves VERY slowly, it is a liquid, not a solid. This is a MASSIVE oversimplification of a highly technical argument. It's also factually incorrect; panes of glass in old windows are thicker at the bottom because they were thicker on one edge to begin with (due to how panes of glass were made at the time) and the glaziers cleverly figured out that, hey, they balance better if you put the WIDE edge on the BOTTOM instead of the top. Also, you can without too much difficulty find windows where they put the glass in any old way, and the thick edge is on the top on some panes, and on the left on some panes, and on the right on some panes, and on the bottom on some panes. To put the final nail in the coffin, the lead solder used to hold the panes in place (which NOBODY argues is a liquid) often has a measurably LOWER viscosity than the glass does, but you don't see little puddles of lead at the bottom of the windows. Among materials scientists, the preferred term is "amorphous solid" or, indeed, "glass". (Not universally, but by a pretty clear majority.) Those who are primarily interested in thermodynamics properties will sometimes use "supercooled liquid."
Glass is a solid liquid it flows very slow as if you ever had a very old piece of glass it will be thicker at the bottom than the top it takes about 100 years to see a big difference in the glass thickness at the bottom hope this helps
No it is not. The belief that glass flows very slowly over time is an old wives tale. The "Proof" shown buy the windows of old buildings being thicker at the bottom is how they were manufactured. There are old glass artifacts that still hold shape and are much older than any house made in the us in the last 200 years.
Cause it fills the container/space that its in-eventually. if you look at really old glass you will see that its thicker at the bottom than the top, and it will have little sort of ripples in it. but i mean seriously it takes forever.
Glass is an amorphous solids and therefore are pseudo solids.Hence like liquids it has tendency to flow.therefore in old buildings the glass paneslook milky in appearence.by Jaspreet Singhanswered on 1-04-2013
Glass is almost completely Silica (silicon dioxide), the naturally occurring form of the element silicon, and is actually a liquid. Look a the bottom edge of an old plate glass window (50 years or older). The bottom will be measureably thicker than the top. This is due to the silica "flowing" downward in response to gravity.
Many of the old homes did not have glass in the windows and used shutters instead when they needed protection from the elements.
Glass is not a true solid. It has no crystalline structure. It has no set melting point, as it is what is known as a "super cooled liquid". The hotter it gets, the faster it flows. I've read that cathedrals with stained glass that is centuries old, find that the glass is each segment is thicker at the bottom. In other words, the glass has flowed downwards over the centuries.
The reason old window glass sometimes looks wavy, is because old methods of producing glass did not produce perfectly clear or flat glass.
Lead
Oil and Grease - Oil for lubrication when its really hot inside your engine. Grease for other lubrication when its cold outside your engine. Adhesives, Silicone Caulks, inhibitors for making wet mount slides for microscopes, Types of glass are also considered to be a highly viscous liquid, as very old windows in 18th century homes have windows whose glass panes are considerable thicker at the bottom than at the top.