0
Why are the three pin plugs are made of brass and not copper or steel?
Wiki User
∙ 11y ago
Brass is used for the manufacture of plug pins for the following reasons. It is a good electrical conductor and is cheaper than other materials such as copper. It is a hard alloy material, therefore it is very wear resistant and will not wear or mark easily. Furthermore, Brass is corosion resistant and will not tarnish easily. Brass is also stiff and therefore will not bend easily when inserted in to the socket.
Wiki User
∙ 12y ago
Wiki User
∙ 13y agoBecause, copper is abundant, cheap and a good conductor of electricity, with minimum resistance.
Another answer
Copper is a good conductor of electricity so it allows the current of electricity to flow quite easily from the socket outlet into the three pin plug, then into the wire and then into the electrical appliance or device.
Copper is also quite cheap so it's a great way for the companies who make the plug and wires (and also the people who buy them!) to save a LOT of money compared to what they would have to pay if they were made of silver or gold, which happen to be even better conductors of electricity...
Wiki User
∙ 11y agoThe reason why the three pins in a plug are made out of brass is because they can conduct electricity better than steel or copper.
Add your answer:
Earn +20 pts
Odd man out between iron zinc copper brass?
Brass is the odd one out among aluminium, brass, copper, and iron. Brass is an alloy while the other three are elements.
What are the three properties of brass?
Brass is a metal. It has a golden-yellow color and is very rigid. It is an alloy of copper and zinc, and at room temperature it is found in solid form. Brass is highly malleable and can also be cast easily
Introduction and characteristics of copper bonded steel ground rod?
Introduction of copper bonded steel ground rod Copper bonded steel ground rod, also known as copper-plated steel rod, is made of hard steel inside, and the outer layer of steel is plated with a layer of copper. The length is generally 1.5m, 2m, 2.5m, 3m, and the diameter is generally 14-25mm. Compared with pure copper rod, copper bonded steel ground rod saves copper material, saves cost, has the same conductivity, and contains the hardness of copper. The copper bonded steel ground rod is mainly used for lightning protection and grounding, which can reduce the resistance value. When the roof lightning rod is struck by lightning, the current can be quickly released to achieve the lightning protection effect. ● Q235 low carbon steel is used, and after large-diameter cold drawing processing, the tensile strength is enhanced, and the toughness is maintained ●The copper layer of the product is firm and has strong corrosion resistance ●The copper layer is not cracked or peeled after bending 180° ●The effect of reducing resistance is obvious ●Long life: 50 years without corrosion Copper bonded steel ground rod/independent grounding pole, reducing the impact grounding resistance of the tower is an effective measure for lightning protection. In order to accurately analyze the impact characteristic law of the grounding device, this paper uses the existing portable tower impact grounding resistance measuring instrument, selects the actual line tower grounding The current and voltage waveforms of the simulated lightning current of the tower grounding device were measured by means of the field test method of the device injecting the simulated lightning impulse current. According to the same conditions as the field test, combined with theoretical calculation and CDEGS simulation analysis, the field test results are in good agreement with the theoretical calculation and simulation analysis. The above is the introduction of copper bonded steel ground rod. copper bonded steel ground rod Features of copper bonded steel ground rod The copper bonded steel ground rod is very easy to install. The electrode unit is installed horizontally, and the amount of excavation is small; No water is required for copper bonded steel ground rod installation. It is especially suitable for construction sites where water is scarce such as in the wild and high mountains; Copper bonded steel ground rod is highly effective in reducing resistance. The three-layer resistance reduction structure is adopted to achieve the ideal comprehensive resistance reduction effect in a limited area; The copper bonded steel ground rod has a long service life. The electrode unit is treated with special anti-corrosion treatment, and the composite backfill can be tightly wrapped, which has a corrosion inhibitory effect on the metal electrode unit; The copper bonded steel ground rod has stable grounding resistance. The main component of the composite backfill is conductive graphite, which relies on electrons to conduct electricity, and the electrode unit will continue to release conductive ions into the surrounding soil to improve the soil around the grounding body. Copper bonded steel ground rod has high safety. The grounding device is designed with a leakage ring structure, which can effectively reduce the ground potential rise caused by the passage of large currents and ensure the safety of ground personnel. The copper bonded steel ground rod is made of super corrosion-resistant material and is suitable for a variety of connection methods. The above are the features of copper bonded steel ground rod. Good reputation supplier of copper bonded steel ground rod The above is about the introduction of copper bonded steel ground rod and features of copper bonded steel ground rod. I hope it will be helpful to you. If you are interested in the product, you can contact us at any time, we are a good reputation supplier of copper bonded steel ground rods, Sichuan Sunlight intelligent electric equipment Co., Ltd has a professional production team of products, It has complete experimental facilities and trial production equipment. You can rest assured to buy here.
Name three metal alloys and a use for each one?
1. Brass: Musical instrument, faucets, decorative hardware, jewelry. Bronze: Hardware for boats, screws, grillwork. Stainless Steel: Tableware, cookware, surgical instruments.
What are the three properties of brass that tells that it is a mixture?
jhj ujkl
Name three metals?
Brass, Copper, Steel
Does steel copper brass aluminum or nickel melt the fastest?
I would think heat conveys much like electricity, the greater the number of "free' electrons the less resistance to the heat , therefore copper would be faster then the other three choices.
Odd man out between iron zinc copper brass?
Brass is the odd one out among aluminium, brass, copper, and iron. Brass is an alloy while the other three are elements.
Name three metals that are mixtures?
Brass (copper and zinc) Bronze (copper and tin) Gunmetal (copper, tin, and zinc)
The three materials condensers are made of?
copper, steel or nickel
Does aluminum steel or copper conduct the most heat?
Of the three, copper is the most effective conductor.
What are the three materials that condensers are made of?
The three types of materials are copper, stainless steel, and nickel.
Name 3 metals that are mixtures?
A metal mixture is called an alloy. Three common examples of alloys include; Brass (Zinc and Copper), Bronze (Tin and Copper) and Steel (Carbon and Iron).
Why isn't three eights compression fitting tightening on copper pipe?
Did you put the ferrule on, the little brass ring?
What are the three properties of brass?
Brass is a metal. It has a golden-yellow color and is very rigid. It is an alloy of copper and zinc, and at room temperature it is found in solid form. Brass is highly malleable and can also be cast easily
Name three ferrous alloys used by modern metalworkers?
brass pewter iron
What are three examples of alloyed metal?
Metal alloys refer to a mixture of two different elements whereby one of them is a metal. Examples of alloyed metals are Brass, Steel and Solder.
