by the intake adapters before it hits the intake manifold im having a problem wit finding the screws to go into it by the intake adapters before it hits the intake manifold im having a problem wit finding the screws to go into it
a good gun smith can fit screws to the gun. Finding the original screws will be almost impossible.
there are a LOT of screws to change out the dash. hardest part is finding a new one. best bet is to go to a salvage yard and test on one there. i am in the middle of doing this for the third time and you must remove the radio, dog house (for the gauges, and the upper heating vents to get to some of the screws. tag all of your screws as u remove them.
A great technical resource for you at the end of this answer-- For online purchasing of ball bearing set screws, see "smallparts.com". For finding part numbers, use this site to search the catalog pages for the right part number: http://www.who-sells-it.com/r/ball-bearing-set-screw.html Screws from ball bearings can be purchased on ebay. It's often times cheaper to purchase them this way.
remove the top trim panel off the dashboard, the front trim panel from the instrument panel and remove the screws. good luck finding a replacement cluster
The blower motor resistor is located under the glove box. You can locate it by finding a 4 wire connector, directly below the glove box hinge (towards the front of the truck). There are 2 screws holding it in. A mirror is helpful in replacing this, but I managed to replace it without one. You will need a nut driver to remove the screws. My suggestion is to leave the wires connected to the resistor while removing the screws.
there are 2.5 million screws. not screws - rivets
A magnet will pick up the iron screws but not the brass.
Tek screws are a name brand type of self drilling screws. They can also be called drill bit screws and self tapping screws. Phillips and other companies manufacture these as well.
The answer will depend on the size of the screws!
one which is screws
can nails and screws be a solution?