there is a brake light switch located at the top/back of the brake arm....sometimes they stick or even break and the spring comes out. ...can pick one up at any parts store...only 2 screws hold it on ...but it is a tight fit under the dash ...bring a flashlight
The left brake light works the right brake light doesn't and the bulbs is good
Remove the tail light housing and replace the bulbs.
In order to change the brake light on the Ford LTD Expedition 500 series you must remove the light cover from the back of the lighting panel. You can access this from the trunk. Inside you will find the bulbs for the tail lights and brake lights. Remove the light and replace it with a new one.
most likely it's your brake light switch shorting out, which also controls the lock for your gearshift and also controls your unlock mode on your torque converter and to cancel your cruise control, located on the base of your foot brake.
yes my brake lights dont work First check the fuses, then check the bulbs then check the brake light switch
There is a switch under brake pedal. This switch controls the brake lights. They some times go bad. Have someone stand behind vehicle while you push on brake pedal, if no brake lights come on. Try pushing the brake switch by hand. Check for power with a voltmeter.
Fuse, brake switch, bulbs. Replace whatever the problem is. There is no way to know without being hands on. Bulbs most likely answer.
you need to replace the brake light switch that is located above the brake pedal underneath the dasboard Here's a link to a video that 1aauto.com has that shows you how to replace the brake light switch.
If the tail lights on a Ford Expedition are inoperative, it is likely there is an electrical issue. If all the tail lights are not working, it is likely a blown fuse.
What fuse is for the 2005 Ford mustang Rear Brake lights?
It's the brake switch. It tells your break lights to come on.
which fuse controls the lift gate or interior lights on a 2003 ford expedition