The USB card readers cannot stop working from the write erase cycle because they only act as the medium between the SD card and the computer.
The USB memory card readers will not stop working from the write and erase cycles whatsoever because they only act as the medium between the memory card and the computer.
No, the USB memory card reader cannot stop working from the write and erase cycles.
Provided that the SD memory card is original and is used in the right way, it will not stop working from the write and erase cycles instead of the USB memory card reader.
USB flash drives will stop working from write and erase cycles when there is a problem with the device.
No, the USB extension cables will not eventually stop working as a result of the write and erase cycles.
Without a code reader (you can buy one for about $80 at most auto parts stores), you can sometimes erase the codes by disconnecting the battery cables. Most newer code readers allow you to erase the computer memory.
The amount of write and erase cycles on a USB flash drive will depend on the flash drive. It is best to check with the manufacturer, because too many write and erase cycles can affect the length of time the flash drive will operate.
you hack an acount to earse a memory.
No you cant
No.
you can't. your stuff is in the memory.
EEEPROM: Emulated EEPROM This is flash memory with a SW layer to give it EEPROM features such as high number of write cycles, auto-erase, single byte writes, etc.