0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why is data bus bidirectional but address bus is unidirectional?
since data can be read /write from/to the microprocessor, hence data bus is bidirectional. if data is required read from microprocessor then it will be pointing to a memory location by the address bus, by indicating which location data its required to read. similarly to write a data to a location, again the microprocessor will be to that particular location by holding that address in address bus. hence it will be unidirectional.
Why data bus is bidirectional bus in Intel 4004?
A data bus is bidirectional because the processor needs it to both read and write. Also, in the case of the 4004, the data bus was tri-multiplexed with the 12 bit address bus and the 8 bit opcode bus.
Is a data bus unidirectional or bidirectional?
The control bus is a unidirectional bus because it can receive the data from any kind of inputs and send back the output. This whole process is done by the data buses.
Why is data bus bidirectional but address bus unidirectional?
The address bus is unidirectional becos address information is always given by microprocessor to i/o devices. The data bus is bidirectional bcos it takes the data from other devices & also give the data to other i/o devices
Need of bidirectional data bus?
A data should be either WRITTEN to a memory or should be READ from a memory (both direction)and so the data bus is bidirectional.
What is bidirectional bus?
A bus in this context is a data route which can carry data in both directions.
Why data bus is bidirectional bus?
The data bus is used to read or write (hence bi-directional) to the data location selected by the address written on the address bus. You only need to write (one-way) to the address bus to select the data location. It does not make sense to read from the address bus.
Why is the data bus in 8085 bidirectional?
So that the processor can both read and write data.
What is the full meaning of USB as used in computer operating system?
The full form of BUS is 'Bidirectional Universal Switch'
What are address bus n data bus?
All computers use three types of basic buses. The name of the bus is generally determined by the type of signal it is carrying or the method of operation. We group the buses into three areas as you see them in their most common uses. They are as follows: Control (also called timing and control bus) bus, Address bus, and data (also called a memory bus) bus. Instruction (I), Operand (O), Input/Output Memory (I/O MEM) or Input/Output Controller (IOC), and Computer Interconnection System (CIS) Time multiplexed bus Control Bus The control bus is used by the CPU to direct and monitor the actions of the other functional areas of the computer. It is used to transmit a variety of individual signals (read, write, interrupt, acknowledge, and so forth) necessary to control and coordinate the operations of the computer. The individual signals transmitted over the control bus and their functions are covered in the appropriate functional area description. Address Bus The address bus consists of all the signals necessary to define any of the possible memory address locations within the computer, or for modular memories any of the possible memory address locations within a module. An address is defined as a label, symbol, or other set of characters used to designate a location or register where information is stored. Before data or instructions can be written into or read from memory by the CPU or I/O sections, an address must be transmitted to memory over the address bus. Data Bus The bidirectional data bus, sometimes called the memory bus, handles the transfer of all data and instructions between functional areas of the computer. The bidirectional data bus can only transmit in one direction at a time. The data bus is used to transfer instructions from memory to the CPU for execution. It carries data (operands) to and from the CPU and memory as required by instruction translation. The data bus is also used to transfer data between memory and the I/O section during input/output operations. The information on the data bus is either written into.
What is an address bus in a microprocessor?
The address bus is a section of the bus that emits the address of the desired instruction or operand.
What is the size of address bus in 8086?
The address bus in the 8085 is 16 bits wide.
