You can, provided that the laser printer has a USB connection and provided that the computer has a USB port and that the Operating System is capable of supporting the printer (it must have the proper "drivers" loaded)
Yes, you plug the USB port of the printer into the USB port in the router.
You plug it into an available USB port on your computer.
plug it in a USB port
plug the printer's cord into the laptop's USB port
An impact printer (dot matrix) usually uses either a serial, or parallel port. It depends on the printer and computer ports available. Most modern inkjet or laser printers use either wifi or a USB connection.
kn laser port
If you cannot find a USB cable for the PRINTER then it is proably a Network printer which means you cannot use it with USB!! :@ If you have no USB port on ur PC/Mac then you need to change it! :D Simples!!
Is the laptop not USB? Or is the printer not USB? Assuming it is the printer, there are components that will allow a serial or parallel printer to be used. Serial or parallel socket (female) on one end, while a USB plug (male) is on the other. There are also single parallel to USB cables for directly connecting the parallel port on the printer to the USB port on the laptop.
It depends on the type of printer! Some printers (older types, mainly) used serial, or parallel ports. Most modern printers use USB or wifi.
The primary difference is that a USB interface type printer requires the computer to have a USB port (as all modern computers do) whereas a parallel interface type printer requires the computer to have a parallel (LPT) port (which many modern computers do not have.) There are USB-to-parallel converters however which plug into USB and allow the use of parallel printers. Additionally, many legacy applications only have support for parallel printers, in these cases, in order to use a USB printer it may be necessary to create a virtual parallel port and map the USB printer to it.
first of all plug in usb to parallel printer cable into the computer windows automatically installed found new hardware after that connect the cable into your printer
Such code usually means that your computer does not see the printer. Try Control Panel->Printer and Faxes->Add a printer->Next->Local printer attached to this computer (uncheck "Automatically detect and install my Plug and Play printer")->Next->Create a new port->Choose "Standard TCP/IP Port"->Next->Next->Enter the ip address of your printer and follow instructions. Most likely you will driver for your printer, thus find it before staring the process.