0
Generally the reason is because of too much heat from the incandescent bulb. Other reasons would be the amperage would exceed the wiring or the lamp socket. Using ohms law (power or watts = amperage times voltage), a 150 watt lamp would take 1.25 amps. A 120 watt bulb would take 1.0 amps. Probably in your question the engineer was concerned with heat instead of amps.
What else can I help you with?
What is the recommended wattage for a 150 watt light bulb in this fixture?
The recommended wattage for a 150 watt light bulb in this fixture is 150 watts.
How many watts for A 150 watt hps lighting fixture?
About 150 watts.
Can you replace a 150 watt metal halide lamp with a 175 watt?
The light bulb needs to match the ballast in the fixture.
Can you replace a 150 watt hallide with a 175 watt?
no you cant if the ballast is for a 150w bulb you have to retro fit the ballast then u can
What size of speakers are available for the Rockford Fosgate speaker line?
They have 12" and 120-150 watt.
Can you use a 150 watt light bulb in a 75 watt rated fixture?
Yes. The rating of bulb fixtures is there to discourage people from using bulbs that create too much heat. Obviously, a 75 watt bulb will produce less heat than a 150 watt bulb so it's quite safe to use the smaller bulb. If you overheat a lighting fixture you can cause premature failure and possibly even a fire.
Can you replace a 150 watt sodium bulb and use a lower 70 watt sodium bulb?
Yes, you can replace a 150 watt sodium bulb with a lower 70 watt sodium bulb. However, the lower wattage bulb may not produce as much light as the original 150 watt bulb, so you may experience a decrease in brightness. Make sure the 70 watt bulb is compatible with your fixture and follow all safety guidelines when replacing the bulb.
Can you use a 150 watt bulb in a 250 watt bulb fixture?
Yes, the rating of the fixture is the maximum size bulb that the fixture should take. The fixture is rated to dissipate a certain amount of heat that is generated by a bulb. By putting in a bigger bulb and thereby generating more heat than the fixture was designed for, could destroy the fixture. Some fires have been known to start this way.
How many lumen's in a 150 watt flood light?
The number of lumens produced by a 150-watt floodlight can vary depending on the efficiency of the light source. However, as a general estimate, a 150-watt floodlight typically produces around 1600 to 1800 lumens. This can vary based on the type of bulb used, the design of the fixture, and any additional features such as dimming capabilities.
How do you find the percent of 120 multiply by 150?
18000
What is 120 percent of 150?
120% of 150 = 120% * 150 = 1.2 * 150 = 180
What should be electrical components for 150 watt metal halide lamp?
At the basic level, you're looking at: * Circuit Protection (fuse or circuit breaker) * Cabling * Mounting hardware (for the light fixture itself) * Within the fixture; A socket, bulb, bulb protection (cover, or sheild)
