The number of lumens produced by a 150-watt floodlight can vary depending on the efficiency of the light source. However, as a general estimate, a 150-watt floodlight typically produces around 1600 to 1800 lumens. This can vary based on the type of bulb used, the design of the fixture, and any additional features such as dimming capabilities.
Halogen lamps run hotter than conventional incandescents, and as a result of their hotter filaments, emit a whiter light with more of the light in the visible range, and less in the infrared. A typical 50W halogen emits between 800 and 950 lumens.
Wikpedia says that halogen lamps produce about 19-20 lumens/watt. If you have a 500W lamp then you get 9500-10000 lumens.
A typical sodium vapor bulb can produce around 100 lumens per watt of power consumed. So, if the bulb is, for example, 150 watts, it can produce around 15,000 lumens per hour.
Amps * Volts = Watts Since you know the Watts, determine your voltage to determine the Amps. For example, if you are using 120 volts: Amps * 120 = 30 and from basic algebra Amps = 30/120 Amps = .25
Your question answers itself... 1000 watts, when operated on a 480-volt source..
A 1,000 watt is 15,000 lumens. A 100 watt bulb is 1,500 lumens.
480 lumens may not be sufficient for a flood light, as flood lights are typically used for wide area illumination and require higher lumen output. Consider a flood light with a higher lumen rating for better coverage and brightness.
A 150-watt light bulb typically produces around 2600-2800 lumens.
From halogen to LED you can divide by 4 to find the equivalent. Therefore an 80 watt LED would do the job.
It's about 600 lumens. The same brightness comes from a 12 Watt compact fluorescent light (CFL).
161 lumens I believe the above answer to be inaccurate. It depends on the light source. For example: For an incandescent light bulb 1 watt it is approx. 18 Lumens. However most LED's use only about 10% the wattage to produce the same amount of light. So for LED's .1 watt produces 18 Lumens.
A 42 watt CFL bulb typically produces around 2800 to 3100 lumens of light output.
A 150-watt light bulb uses energy at the rate of 150 watts, when it's turned on.
The maximum number of lumens produced by a 150 watt light bulb is typically around 2600 to 3000 lumens.
Approximately, 750 lumens is equivalent to a 60-watt incandescent light bulb.
Incandescent bulbs give about 10 lumens of light per watt of electric power Halogens give about 13 lumens per watt CFLs give about 50 lumens per watt So it depends on the type of bulb.
A 400 watt Mercury vapor light bulb produces roughly 23,000 lumens. In comparison to a 400 watt metal haloid and or high-pressure sodium, not as good. Metal haliod and high-pressure sodium produces 30,000 lumens.