Because a combustion engine keeps turning over as long as it's running. If you hadn't got a clutch (or the torque converter in an auto tranny) the engine would have to be stopped everytime the vehicle was stopped.
Also, when you're changing gears you're hooking a turning engine up to parts that aren't turning. If you didn't have a clutch to smooth out that transition it'd get very jerky.
There not? I just put a diaphragm clutch in my street car.
A clutch pressure plate is used to clamp the disc to the flywheel and transfers the power to the transmission.
It did come available in a manual, only 4spd automatic. So no it does have a clutch. Atuomatics have "clutch packs" used to shift gears. Any vehicle has a clutch.
It depends on the quality of clutch in the vehicle you have. my sister used to ride her clutch a lot, as did a few other people i knew. If you are lucky, your clutch may last a year or two... its best not to ride the clutch too much if you can help it.
NO FREE PLAY AT TOP POSITION - CLUTCH SLIPS AND VEHICLE DOES NOT MOVE TOO MUCH FREE PLAY AT BOTTOM - VEHICLE WON'T SHIFT CLUTCH DOES NOT RELEASE
Unless someone has done a custom hydraulic clutch setup on this vehicle- there is no clutch fluid. It is a cable clutch linkage on a stock vehicle. If it has been customized there will be a easily identifiable reservoir connected to the clutch pedal or connected to the clutch master cylinder by a hose.
At the clutch plate and the pressure plate.
sounds like maybe a clutch release bearing. what vehicle
Clutch disc is worn out. Not knowing what vehicle you have, most are hydraulically operated and there is no adjustment. Time for clutch replacement.
Imogen Syms
A latching brake usually used to keep the vehicle stationary. It is sometimes also used to prevent a vehicle from rolling when the operator needs both feet to operate the clutch and throttle pedals.
In small engine cars, the centrifugal clutch serves as an automatic clutch that allows the vehicle's engine to idle without the driver doing anything. Such clutches are commonly used in chainsaws, go-karts, and lawnmowers.