The term means a product similar to coal and mined the same way. Some is made by using coking oven from coal. Coal is cheaper and that is why it is used more often. Coke is cleaner and other methods should be looked into before coal and oil run out.
Absolulutely!! Coke is make by people and it's not living so...YES!!
One product of coal is coke, which is used as a fuel in industrial processes such as iron smelting.
Coke is used in a lime kiln as a fuel source to provide the high temperatures needed for the chemical reactions that convert limestone into quicklime. Coke is preferred due to its high carbon content and low impurities, making it an efficient and reliable fuel for the lime kiln process.
After the distillation of coke, the remaining product is called coke residue or petroleum coke. It is a solid carbonaceous material that is used as a fuel and in various industrial processes such as the production of aluminum and steel.
Pet coke is a carbonaceous solid derived from oil refinery cracking processes. Marketable coke is coke that is relatively pure carbon and can be sold for use as fuel, in the manufacture of dry cells, electrodes, etc. Needle coke, also called acicular coke, is a highly crystalline petroleum coke used in the production of electrodes for the steel and aluminum industries. Catalyst coke is coke that has deposited on the catalysts used in oil refining, such as those in a catalytic cracker. This coke is impure and is only used for fuel. Petroleum coke's high heat and low ash make a good fuel for power generation in coal-fired boilers but is high in sulphur and low in volatile content which pose some environmental and technical problems with its combustion.Metallurgical coke is produced by destructive distillation of coal in coke ovens. Prepared coal is "coked" or heated in an oxygen-free atmosphere until all volatile components in the coal evapoarate. The remaining material is called "coke", sulphur content is low in this form. Most metallurgical coke is used in iron and steel industry processes such as blast furnaces, sinter plants, and foundries to reduce iron ore to iron. Over 90% of the total metallurgical coke production is dedicated to blast furnace operations.
Pet-coke, or petroleum coke, is a byproduct of the oil refining process, while coal-coke is a byproduct of coal carbonization. Pet-coke has a higher carbon content and lower impurities compared to coal-coke, making it a more efficient fuel source. Pet-coke is typically used in industrial processes, while coal-coke is mainly used in the steel industry.
ore and coke
Coke is a type of fuel made from coal.
petroleum coke is used primarily for heating in the eastern United States, where most of its manufacturers are based. This fuel is also used in aluminum anodes, furnace electrodes and liners
Yes, coal is a primary component used to produce coke. Coke is created by heating coal in the absence of air, a process known as carbonization, which removes volatile substances and leaves behind a porous, carbon-rich material. This coke is then used primarily in the steel-making process as a fuel and reducing agent.
Natural gas is a fossil fuel derived from organic matter such as plant and animal remains, while coke is a solid carbonaceous material produced from coal. Therefore, natural gas is not an example of coke.
Coke is produced from coal through a process called destructive distillation. In this process, coal is heated in the absence of air to drive off volatile components, leaving behind coke. The coke produced is a porous material that is used as a fuel and as a reducing agent in the smelting of iron ore.