whenever steam is utilised as heating media, steam condensate is produced.This steam condensatecan be utilsed for steam generation at some other location and needs to be pumped, for pumping you need some intermediate storage of this condensate. For storing it we use condensate pot whose level can be controlled.
CondenSER is correct. CondenSOR is not a real word. Regards!
Unlike a static condenser (capacitor bank), the value of reactive power from a synchronous condenser can be continuously adjusted. A synchronous condenser also has other advantages over static condensers such as: - not being affecting by harmonics (some harmonics can even be absorbed by a synch condenser) - producing no switching transients
The reason why it is called a barometric condenser is because it makes contact and it is a long vertical pipe into which it condensates and cools the liquid flow to accomplish the removal of pressure. It is also stated that when the pump is used the system is called a low level barometric condenser.
condenser approach is heat transfer the water to gas of condenser efficiency is good less then below (2 F) the system is working good.
There are several roles of a condenser system depending on what is using it. In a microscope, a condenser system helps gather and focus light for a clearer view. In an air conditioner a condenser system cools heated gas so it can be used again.
no
no
to splite the phase
An atmospheric condenser operates naturally at atmospheric pressure (1.013bar). A vacuum condenser operates at pressures below atmospheric and will use some sort of pump to provide a vacuum.
Liebig condenser, Vigreaux column, Snyder column, West condenser, Allihn condenser, Graham condenser, Dimroth condenser, Friedrichs condenser. There are no shortage of these!
This device is a condenser.
CondenSER is correct. CondenSOR is not a real word. Regards!
The refrigerant is for the entire air conditioner system not just for the condenser units. First, this question is not specific! There is whole bunch air conditioner condenser. Each manufacture design different condenser capacity. I might come back to this question.
Use a condenser, or desalinization.
AKG 220 Condenser Microphone
Remove any leaves or debris from the condenser fins, you can go over it lightly with a soft brush if you wish. Don't use high pressure air or water, as condenser fins bend easily. Use a fin comb to straighten any bent fins.
Which condenser are you asking about? There are a couple things that are called a condenser.