0
that main resign is high voltage is voltage value is high that same time current value is very low. easy to transmission to long distance consumer(HT required consumer) end we have not voltage loss and current also and conductor cost is reduced that is conductor thickness low ,so current level is low
What else can I help you with?
Can connect high voltage supply to low voltage device?
Yes, but it won't be pretty.
Could it be dangerous to connect an alternator to a long transmission line if the line had a high capacitance?
Yes. Because... If we connect an alternator to a transmission line of high capacitance the line voltage will increase and caused a line voltage difference, which does not satisfied the condition of parallel operation of same voltage rating. [By Akhtaruzzaman08]
Can pentax 540 fgz be used with Lumedyne 052c Minicycler?
Yes. You need Quantum cable CN3 to connect the high voltage output of the Minicycler to the high voltage input of the flash.
Why is it dangerous for connect an alternator with high capacitance transmission line?
It is dangerous because with capacitive load line voltage will increase which cause the line voltage difference and it will not satisfy the parallel operation of the same voltage rating.
How do you check ripple voltage in an alternator?
Connect an oscilloscope and check the screen for a smooth constant ripple pattern at high revolution and low revolution.
How electrical power is transmitted from power plan to the consumer?
electrical power from the power plant to consumer goes through the transmission & distribution system, first we transmit the high voltage power from the power plant to sub station in sub station we step down the voltage according to need & distribute it to the demand.
What is the Procedure for ratio test for Transformers?
short all the high voltage bushings toghether.do same with low voltage bushings.disconnect the neutral from the ground.earth the body of the transformer.earth the ttr set. connect the common point of high voltage bushing to hv terminal of ttr and connect the common point of lv bushing to lv terminal of ttr set.connect the neutral of transformet with the n terminal of ttr set. now crank the generator.im out of time will answer this question later
How does analog switch AD7512 works?
It can connect 2 pins with a very high resistance and with a quite low resistance, depending on the voltage of the corresponding input pin.
What happens to the voltage before it is distributed to the consumer?
Before electricity is distributed to consumers, the voltage is stepped down through a series of transformers. Initially, high-voltage electricity generated at power plants is transmitted over long distances to minimize energy loss. As it approaches urban or residential areas, the voltage is reduced to safer levels suitable for consumer use, typically between 120 to 240 volts. This transformation ensures that the electricity is at a usable level for homes and businesses.
Electrical Properties of Transformers why you use it?
Transformers are used to convert electricity from high voltage to low voltage and from low voltage to high voltage.
What is 66KV?
66 kV refers to an electrical voltage level of 66 kilovolts, which is commonly used in power transmission and distribution systems. This high voltage is employed to efficiently transport electricity over long distances, reducing energy losses. It is typically found in substations and is used to connect high-voltage transmission lines to lower voltage distribution networks. Systems operating at this voltage require specialized equipment and safety measures to handle the associated risks.
What is medium and high voltage?
Medium voltage is over 1000 v, high voltage is over 45 kV.
