The electrical contacts on the pulse board are likely not making contact or are damaged in some way. You can replace the pulse board (about $25 from pep boys.), it is located on the firewall, next to the wiper motor. Actually looks like a square box adjacent to the wiper motor. You may just need to clean the electical contacts inside. They are two brass or copper pieces which make contact with a spiral wire on the circuit board. Make sure they are clean amd making contact with the circuit board.
NO.
The most common cause that windshield wipers stop working is a blown fuse. The windshield wiper motor may need to be changed is also common.
the windshield wiper motor could be getting Hot! Mine does the same thing, then when it cools off they work again.
Windshield wipers are an important safety feature on cars. They stop working when their motor goes out, or when the blade is too worn out.
check the fuse, otherwise the linkeage or the motor broke down
BROKEN CRUISE CONTROL CABLE (CHECK AT THROTTLEBODY AND FOLLOW TO TRANSMISSION)
If the chime won't stop on your Chevy Silverado, you can remove the chime fuse in order to make it stop. Open the fuse panel and choose the fuse that is marked 'chime module.'
Windows and wipers and dome light stop working in 98 ford f150
Normally its a fuse. Check your owner's manual to find where the fuses are and which one is related to the wipers.
The wipers of a Subaru Legacy will stop working if the fuse has blown or the motor is defective. The wiring harness may also become corroded or loose.
Could be a blown fuse or the motor has stop working.
2006 was the last year of production.