in dash lights
Take off the steering wheel. There is a turn signal bar that you have to clean the pins and bend them out to put more pressure on the contacts. Then put it back together.
A blown fuse.
Probably the turn signals , hazard flashers , high beam headlights etc. like it does on my 1995 Ford Explorer
No turn signals are not by law required, as long as you have your headlight, brake light, and you know the hand signals for turning on a bike than you don't need flashers. But if you're not using flashers, you are still required to use hand signals
depends on which lights? inside over head? /Dash board?/Doors? /front headlights?/Flashers?/ turn signals?/ Backing lights?/ Parking lights?/ So which ones ? what Year??
what do i try next? i tried a new flasher on the steering column. my flashers work, but turn signals don't.
because there are two diffrent flashers 1 for the flashers and 1 for turn
If you have no brake lights or tail lights then you've probably got an electrical problem. Check the fuses first and see if you have one or more blown.
this car may have separate flashers for the turn signals and the emergency flashers
There are two relays, one for the emergency flashers, and one for the turn signals. Your turn signal flasher is defective and needs replacing.
Hand signals are to this day a legal form of traffic control devices.
My turn signals are not working on my 92 buick regal.