0
What else can I help you with?
What does barbie say when she gets a flat tire?
Hole
Can run flat tires be replaced with conventional tire?
Cars that use run-flat tires don't have a spare tire. But there's no other reason you can't switch to regular tires. Best thing to do is learn how to plug a nail hole and carry a can of fix-a-flat or a small compressed air cylinder that you can use to re-inflate the tire should you encounter a flat. Or if you have CAA or AAA you can call and have them fix it.
How do puncture-proof tires work on cars?
Tires are not really puncture proof but instead are puncture sealing tires. The tire is built with a puncture sealant type rubber on the inside of the tire. When any object punctures the tire it goes through the material. When the object is remove the material seals the hole. This material has been used for years and does work but at a price. The tire is heavier and cost more to manufacture. There are also run-flat tires that have an internal blatter within the tire that prevents the tire from going completely flat.
Can a flattened tire be repaired or do you need or buy a new one?
Depends on the flat. A puncture from a nail or screw can usually be repaired pretty well. A hole in the side wall of the tire is pretty difficult to fix. Consult your tire professionals, they will tell you what can be done. ~most tires with holes can be plugged with an inexpensive plug kit. very simple procedure. fix a flat is a bad option. its known to ruin tires. if the hole or rip is iin the side, you would want to purchase a new tire.
What gets bigger the more you take out of it?
A hole in the ground.
How can I drill a flat bottom hole?
To drill a flat bottom hole, use a drill bit with a flat end or a spade bit. Make sure the drill is set to a low speed and apply even pressure while drilling. Keep the drill perpendicular to the surface to ensure a flat bottom hole.
How do you drill a five sixteenth inch hole four inch depth flat bottom hole?
5/16 hole X 4 inch on a flat bottom hole: This will depend on the material, and tools available. Use a 1/8 bit, then 5/16. If you are not sure how deep the drill bit is in the hole, paint white out on the bit as your 4 inch mark so you can see it while the drill is spinning. If the material is metal, you will need coolant. To get the flat bottom: it wood, put a flat ended bolt into the hole and hammer, it will flatten the hole, it metal, forget about it, the hole is quite flat, and a pain in the butt to change. :-)
What when you take more out of it it becomes bigger?
A hole gets bigger when you take more away.
What gets bigger as you empty it?
A hole.
What gets bigger as you take away from it or gets smaller as you add to it?
A hole.
Does hitting a pot hole screw up your rims?
Might do. Depends on the size of the pot hole, your tires and on how fast/hard you hit it.
What are mud tires used for?
Mud tires are used for driving in the mud or in sand. They keep a truck for getting stuck and digging a hole in the road.
