The better quality tools all have 3 wires. You are looking at cheaper tools.
In the USA the National Electrical Code prohibits the "point of attachment" of an overhead electric service to be within 36 inches of an openable window, doorway, or porch... in other words they do not want a person to be able to reach out of a building opening and be able to touch exposed live power wires. I believe this rule applies to all buildings not just residential. The "point of attachment" is the area near the top of the building's electrical conduit where the building wires are spliced to the utility company wires. This is the only area where there should be exposed power wires. There is no distance limitation from windows and doors for the remainder of the electrical service that has no exposed power wires, such as the conduits, meters, panels
Yes they can but the electrical code states that the wires can only be 1/0 AWG and larger.
Conduit fitting is used on metal pipes that house electrical wires. These fittings are not only to connect the various pieces together, but to keep a relatively water tight seal to the wires.
We don't generally use silver electrical wires because silver costs more than copper and is only marginally better as a conductor. Economics and practicality dictate our choices here. Copper is a much more common metal than silver.
In a house, usually all the outlets in a room are on one breaker or fuse. Each thing plugged into those outlets consumes some electrical power. This is a number rated in Watts. In this case, the more Watts something consumes, the higher the current is (measured in Amps) in the wires that connect the outlets to the main power in the breaker box. The current in power circuit must be limited for safety reasons. The wires in the walls can only handle a certain amount of current safely. If too much current flows the wires can become extremely hot, possibly starting a fire.
In the USA the National Electrical Code prohibits the "point of attachment" of an overhead electric service to be within 36 inches of an openable window, doorway, or porch... in other words they do not want a person to be able to reach out of a building opening and be able to touch exposed live power wires. I believe this rule applies to all buildings not just residential. The "point of attachment" is the area near the top of the building's electrical conduit where the building wires are spliced to the utility company wires. This is the only area where there should be exposed power wires. There is no distance limitation from windows and doors for the remainder of the electrical service that has no exposed power wires, such as the conduits, meters, panels
The load that is connected to the circuit is what draws the power of the electrical circuit.
The electrical connection could possibly be inside the door panel. I would not advise just cutting the wires ... this could lead to a dead short if the two wires got crossed together.
Fix your laptop power cord that hasn't been supplying consistent power. some basic tools, electrical tape, and the perseverance that only a true cheapskate can muster. I performed this on my very own HP Pavilion's power cord and adapter.
Yes they can but the electrical code states that the wires can only be 1/0 AWG and larger.
Only if you touch them :) Some believe the electro-magnetic energy from power lines may cause cancer. Most are concerned with overhead power lines when needed to trim trees, or access other elevated areas.
A chuck is ONLY used on a drill, so ALL other power tools do not use a chuck.
Hand tools are devices for performing work on a material or a physical system using only hands while the power toolsare tools powered by an electric motor Hand tools are devices for performing work on a material or a physical system using only hands while the power tools are tools powered by an electric motorHand tools use hands and power tools use power.a power tool is an electric tool like a band saw or circular saw, a hand tool is a non electric one like a file or hammerHand tools you use your hands and power tools you use power like air or electricity
the 79 dodge powerwagon only had a mechanical fuel pump. so unless someone added a after market electrical one. it should not have wires
Only a phone jack.
A Black and Decker is a generic name for any type of electrical power tool, whether it is one made by the Black and Decker company or not.
When discussing electrical current, DC stands for Direct Current (a current where the electron flow in the wires goes only one way)