Want this question answered?
dont
Check your owners manual.
If it's the same as the 1996 Ford Ranger , fuse # 33 is a 15 amp fuse for the High beam lamps
Bad bulbs or multifunction switch
It sounds like the low beam/high beam switch is bad. Fuses are not the problem since they are built into the headlight switch and would cause headlights to blink or not come on for both high and low beam headlights.
your bulbs are burnt out. when you switch on the high beams its only the high beams. but when you flash your brights it lights up both high and low beams.
I'd be looking at a faulty headlight or stalk switch.
I would start with the easy answer. Check both of your headlamps to be sure that the low beam filament is still intact. If all is well there, I would start leaning towards the multi-function switch (which is the headlamp / turn signal lever.
Answer: on the turning signal switch turn the handle forward for headlights. high beams pull in to flash. push out for high beams to stay on.
Bad low beam relay or dimmer switch
Bad bulbs Bad dimmer switch
Pull back on the turn signal lever to change from high beams to low beams If the turn signal lever is pushed forward the high beams stay on and if the turn signal lever is pulled back all the way that is the " flash to pass " feature