When engine's rpm increase, the elctric generator of the scooter or motorcycle and any other vehicle will rotate also at high speed. It will produce more electricity the more you idle your engine. Some motorcycle's and scooter's voltage regulator is not accuratetely suppress the excess electricity coming from the electric generator (it is maybe due to price competition between vehicle manufacturers). Over-voltage will burn-out your lights and it shorten the life of your battery. So I suggest to modify your voltage regulator but only well known electronics technician or engineer know how to choose the suitable regulator and how to install it.
What would cause your fuse to blow when you turn on your lights on your 1993 mazda 323 the fuse to the tail lights on dash lights blow?
Bad switch?
When your tail lights are out you can simply replace them. If they continue to blow, you may have an electrical problem.
check your fuses
Your headlights may not dim because you don't have dimmer lights. Dimmer lights can blow and leave you with just the high beams.
Can lights that are rated as IC "insulation contact" are the only style approved for use with blown or batt insulation.
Short in the wiring or light bulb socket.
Dead short to ground in either: Parking lights or sockets Tail lights or sockets Dash lights or sockets
By blowing more air into the balloon, you can increase the air pressure inside it. The higher the volume of air you blow in, the greater the air pressure will be.
Bad fuseTry replacingIf it continues to blow you will have to check circuit to find problem
A short to ground causes all fuses to blow. If you have a trailer connecter then start there first.
chemical dosing increase, top brine temperature increase, blow down increase, distillate last stage temperature reduce, production increase