0
some people are ignorit and think that pulling the fire alarm is a joke (it is not a joke fire men and police are always at the scene of a fire alarm even if it is falsely pulled,police and fire men take it very serious)
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the property of breaking glass used in fire alarm?
There is no special property of the Break Glass that is used in older fire alarms; it is typically standard glass that will shatter on impact. The use of safety glass is not ideal, as this type of glass does not break away to give access to the fire pull.
What are the most common causes of false alarms in fire alarm systems?
As an expert on fire safety, I have seen many times when fire alarm systems send out false alarms. False alarms can be very annoying and sometimes even lead to fines or penalties. Based on my own experience, this answer will mention the most common reasons why fire alarms go off when they shouldn't. Cooking is one of the most common things that set off false alarms. Smoke detectors can be set off by smoke and steam from cooking, which makes them sound an alarm. This can be a major issue in commercial kitchens, where cooking happens round-the-clock. To avoid false alarms, it's important to make sure that smoke detectors are kept in good shape and aren't too close to cooking appliances. Dust and dirt are also common causes of false alarms. Over time, dust and other particles can build up in smoke detectors and make them stop working. Dust and debris can cause false alarms, which can be prevented by cleaning and maintenance performed regularly. Environmental factors can also trigger false alarms. For example, smoke detectors can stop working if the temperature or humidity changes. It's important to make sure that smoke detectors are set up in places with stable temperatures and that they are calibrated correctly. Sometimes human error can result in false alarms. For instance, someone might turn on a pull station by accident or mess with a smoke detector. Ensure that all employees are trained in fire safety and know the consequences of a false alarm. Lastly, outdated or broken equipment can also cause false alarms. False alarms are more likely to happen with fire alarm systems that are too old or haven't been properly maintained. Routine inspections and maintenance can help keep equipment from breaking down and setting off false alarms. So, false alarms can be very annoying and even lead to fines or other penalties. To prevent false alarms and make sure people are safe, I suggest hiring a genuine fire alarm service in Glendora. Moreover, regular cleaning and maintenance, proper staff training, and upgrading modern, reliable equipment will also help.
What happens if you pull the fire alarm at school?
You will get in big trouble and the fire department will show up, usually. Many fire alarms emit an ink that is visible under ultraviolet light so that the person who set it off can be identified and punished accordingly.
How do firefighters put out fire storms?
They really can't put them out. When a fire gets that bad it sucks out all the oxygen in the air and it will pull people into the fire.
Does a fire alarm pull still activate even when you open the cover protecting it?
There are many pull stations that require TWO actions such as "break glass and pull lever" or "lift cover and pull handle" or "pull handle to open and depress hook". The activation doesn't take place until the second action is completed, although a "trouble" or "tamper" signal can certainly be activated by the simple opening of the cover, as would occur with electronically monitored fire extinguishers. The purpose of the cover is to cut down on accidental/nuisance alarms. Lifting the cover is just an extra step before pulling the pull station.
Do some fire alarms squirt ink when pulled?
I am a great person to answer this question because I own my own fire alarm system (I put it together myself). The reason some fire alarms (depending how sophisticated and advanced the alarm system is) squirt ink is due to the fact that, say for example, some decides to pull the fire alarm at a school, it will leave a dye on your fingers you that you can't see, but the authorities can. They may arrest you for calling in a false alarm, and wasting the fire department's time. It really does not "squirt" the ink. As it simply just sits on the handle of the fire alarm. Basically how it works is they put a little vegetable based dye on the pull station handle and when the person who pulled it pulls it they will get the dye on their hands. The trick is when they attempt to wash it off of their hands , it only spreads and gets worse! This way police or whoever can easily identify the culprit because of their unusually blue colored hands. And it stays on for 48 hours!
When using a fire extinguisher remember to pull the pin aim at the base of the fire squeeze the?
Sweep the fire out. P A S S. pull, aim, squeeze, sweep.
How do you work a fire alarm?
To work a fire alarm, you must first identify the type of fire alarm system in your building. Operating a fire alarm system typically involves these steps: Activate the Alarm: If you notice a fire or smoke, find the nearest fire alarm pull station. It's usually a red box with a glass cover. Pulling the lever inside the box activates the alarm. Automatic Detection: In most cases, fire alarms are activated automatically by smoke detectors or heat sensors. When these devices detect smoke or excessive heat, they trigger the alarm. Evacuate the Area: When the fire alarm sounds, it's crucial to evacuate the building immediately. Follow the predetermined evacuation routes and use stairwells, not elevators, which might get stuck during a fire. Do Not Ignore Alarms: Even if you think it might be a false alarm, always take a fire alarm seriously. It's better to be safe and evacuate than to risk your life and the lives of others. Do Not Re-enter the Building: Never re-enter the building until the all-clear signal is given by emergency personnel. Firefighters will need to ensure the building is safe before allowing people back inside. Remember, fire alarms are there to save lives. If you are unsure how to operate a fire alarm system, you should familiarize yourself with the instructions provided in your building or ask someone responsible for building safety for assistance.
Do you pull the triger on a xploderz gun to fire?
no we just pull the power on back of it
How do you install pull station?
If you have to ask hereSince most pull stations are for fire alarms I will assume that's what you are asking about. A fire alarm pull is an important safety device. If it doesn't work, you can have a lot of property damage and open yourself up to a crippling liability lawsuit. You should hire a professional or educate yourself at a more reputable source. You may need certifications to do this.Anyways...The pull station should wire into your sensor loop. This may vary from system to system (I've never installed one) so you should check your documentation or possibly pull another station off to see how it is wired. Again, be wary of the liability issues you open yourself up to with this.
Which words is an acronym for how to use a fire extinguisher - push pull or pass?
Pull pin Aim Squeeze trigger Sweep base of fire
what is the regulation for emergancy call phones in a factory of 800+ people. or is the fire pull box enough?
There is no mandatory requirement to have emergency phones in a factory. The building codes dictate the number of doors, sprinklers and number of fire pull boxes according to the area of the building/factory.
