0
Why do the brake lights remain on with the car turned off in 87 Nissan sentra without depressing pedal?
Wiki User
∙ 16y ago
the most common reason is the switch that mounts to the brake peddal is malfunctioning. somecars and truckshave this switch mounted on the mastercylinder. it is difficult to get to and see on some cars and trucks it is under the dash mounted to the brake peddal. some are simple good luck
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Why do your reverse lights remain on with the tail lights?
Either the switch that turns the backup lights on is out of adjustment, or has failed in the on position.
Remain stopped as long as these lights on a school bus are flashing?
Red lights flashing on a school bus mean remain stopped until they are turned off.
Why do your brake lights remain on when you have the lights on but work just fine when they are off?
This usually means a bad or wrong bulb in the tail lights
Why do my 2000 Subaru Forester parking lights stay on after light switch is off?
There is a second light switch that activates the parking lights without the key being on. It is on top of the steering column behind the steering wheel. If this switch is turned off and the lights remain on when the key is off, there is a malfunction in this circuit.
How do you reset the ABS light 2006 Nissan xterra and the VLC warning lights?
The abs light is on because there is a problem with the abs system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself after a short drive.
Why would the parking lights stay on after the car is put into park and the engine is turned off?
if you leave the parking lights switch "ON" the lights will remain on, even if the car has been turned off.
What causes a PT cruiser fog lights to remain on?
A failed switch is a common cause.
When you come upon a school bus which is stopped and flashing red lights?
You should remain stopped until the bus's red lights are no longer flashing.
What is the ability to move or to remain in a a position without losing control of falling?
It is the ability to move or to remain in a position without losing control or falling.
Why would you want a school wired in parallel?
1. You may not want all lights on, so with a parallel circuit you can turn some off while the others remain lit (you cannot do this with series) 2. If one of the lights go out, the others will remain lit
How do you turn off Peugeot 407 headlight washer?
Unfortunately, you can't as it is programmed to remain on automatic via the cars software. You can however just wash the front screen without washing the lights at the same time, but you will need to ensure that your auto lights are set to the off position (obviously not whilst driving at night!).
On a 91 Camry should the brake lights come on as tail lights when you turn on lights or remain out until brakes are applied even if lights are turned on?
In the back should be tail lights which always come on when the headlights or parking lights are on, and stoplights which come on whenever the brakes are pressed. The stoplights should be brighter than the tail lights, but they should be separate.
