A Ground or Earth wire is wire used to connect the frames and outer casings of appliances and power supply panels to the Earth.
For more information see the answer to the Related Question shown below.
An open ground is a severe safety issue. The ground needs to be connected to protect the user in case of appliance fault. Run new wire with a ground or call an electrician. Have it fixed, negligence is fatal.
It means a wire in the ground.
Black wire to gold screw terminal, white wire to silver screw terminal, ground wire to ground terminal. I am sorry, I can't even begin to answer this question. I don't what you are trying to do and I am positive you don't either. Call a pro, please...pkazsr
That Thermostat is LOW voltage. IT does not have a ground wire. There is no need for a ground. it only opperates on 24 volts. there may be a green wire but it does not mean it is a ground
If there is no ground wire connect the ground wire to the neutral wire.
Check the continuity of the ground wire from both the ends. Ensure the ground wire is properly connected to earth / ground terminals
There should be no voltage on the neutral wire to ground. This is a serious situation. Call a qualified electrician to check this out.
If you are connecting 120 volts, you connect the black wire to the breaker, white wire to the neutral bar, and ground wire to the ground bar. If you are connecting 240 volts connect the black & white wires to the breaker, & ground wire to the ground bar.
In the USA we call it the ground. If there is a cross in the wires from hot to common the ground or earth wire will give the electricity an easier path to the ground instead of going through a live person. The earth is attached in the main box to a copper rod hammered into the ground. This makes it easier for electricity to get to the ground.
Yes, if there in no ground wire that is acceptable on a home with no ground wires.
If the voltage between real ground and the ground wire is not 0.0000 Volt, then the wire is not grounded properly.
Some older wire does not have a ground. All you can do in that case is use a jumper wire to connect the ground to the neutral.