When you add hot water to cold water, the cold water warms up because of thermal conduction. Some of the kinetic energy of the hot water transfers to the cold water on contact, eventually leading to a uniform temperature throughout.
chemical
Hot water is lighter then cold water so it would stay up on top of cold water till both waters naturalize to the same temp. a good example is a water heater and (if its not to old) open your drain at the bottom of the water heater and if your dip tube is still good you should always get cold water out of it even if the water heater is on and your water heater pressure is on.
When hot water and cold water are mixed together, heat flows from hot water to cold water and brings them to equilibrium at a temperature intermediate to that of hot water and the cold water That may be right, but I think that the hot water would be more dominant causing the cold water to almost instantly turn hot.
hot
You can add cold water to hot tea
hot, if cold, there is a posibility of a cold!
A person needs one box of lime jello, one cup of boiling water and one cup of cold water for green jello. Mix the jello until it dissolves in the hot water and then add the cold water. Put the jello in the refrigerator for a few hours until it is the right consistency to eat.
When you add hot water to cold water, the cold water warms up because of thermal conduction. Some of the kinetic energy of the hot water transfers to the cold water on contact, eventually leading to a uniform temperature throughout.
It is super easy: Put jello powder in a bowl, add 2 cups of hot water, stir until all the mix dissolves, add 2 cups of cold water, stir for a couple seconds, refrigerate for a couple hours and voila!
hey if you want to make jello you have to 1 cup of HOT! water then you stirr till the sugar is gone.Then you put one cup of cold water the you put it in the frig for four hours then you have jello
Hot sugar is soft, when you add cold liquid it will get hard at once.
When a car is hot, keep the car running and add water to the radiator. When a car is cold, you can simply put the water into the radiator.
It depends on many factors. Some of them are:how deep the pool is;how cold the pool water is;how hot the hot water is;how cold the air is;how cold the surrounding ground is;how windy it is; andhow warm you want the pool water.
Water can be hot or cold if you want
First, you boil some water, make sure the wateer gets hot, the you empty the jello into the container that you are going to refrigerate the container, then pour enough of hot water, mix until the jello is liquidifed. then put in the refrigerator for about 4 hours.
Yes. You can freeze the water, making it expand, or you can add cold water to a hot engine, shocking the block. You prevent freezing with antifreeze. You prevent shock by never adding water to a hot engine. If there is enough water in the engine to have the water pump provide circulation, you can add water SLOWLY, but you should really only add water to a hot engine when there is very little to add.