Do not touch lenses. ALWAYS start with the least magnification, and work upwards. Clean slides and microscope when finished with it. Cover microscope with dust cover when not in use. Never swing the microscope.
remove the slide,return the low-power objective, use lens paper to clean the stage of microscope and the lenses
The stage of the microscope should be kept clean and dry A microscope must always be carried with both hands. One holds the limb while the other is placed under the base to provide support
1. Always carry the microscope in an upright position with two hands. One hand should support the base and the other should be on the on the arm. Use lens paper and lens cleaning solution to clean the lenses on the microscope. Paper towel will scratch the lenses. Use a soft cloth to clean other parts of the microscope. Lens cleaning fluid and paper is a must. Do not substitute paper towel, which is far too coarse and will scratch the lenses. Always set your microscope on a clean, flat surface. 5. Always remove slides from the stage and rotate the nosepiece to the lowest power before returning the microscope to its storage area.
Always carry the microscope by putting one hand under the shoe-shaped base and grasping the curved stand that supports the tube and its lenses with the other hand. Everything should be in working order, clean and oil free of dust. If you have a slide with a prepared sample, place it on the stage of the microscope. To maintain the good condition of your microscope, first and foremost guard it from dust. Cover the microscope with a plastic hood when you are not using the instrument and always store it in its case. Clean the microscope carefully to avoid the scratch in the lenses. If some of the lenses have fingerprints, clean them either with lens paper or with some alcohol and a cotton swab. Rinse dirty slides and cover glasses in liquid detergent and warm water.
you clean it with lens paper.
with alcohol wipes
use alcohol to clean the lens
Sterile is clean and clean is sterile, so both
To clean a microscope after finishing a practical is by using lens paper to wipe off the lens. Use a clean and dry cloth to wipe the entire microscope. Do not use water or oil, as it may get into small openings and ruin some functions.
spit and rub
Microfiber Cleaning Cloth for Microscope Lenses
The first step to clean a microscope lens is to take some lens cleaning paper that you can find in specialty shops or distributors of laboratory equipment. Alternatively, use certified cotton. Never touch the microscope lens with your fingertips since fingerprints can affect the microscope's visibility.
Do not touch lenses. ALWAYS start with the least magnification, and work upwards. Clean slides and microscope when finished with it. Cover microscope with dust cover when not in use. Never swing the microscope.
The microscope is a high precision instrument, and all members of this class should be kept clean, dry, and dust free.
The microscope is a high precision instrument, and all members of this class should be kept clean, dry, and dust free.
Put it in a safe place. And clean it first