Want this question answered?
a norh pole and a south pole
Cutting a magnet in half can be done in a number of ways. A hack saw might work well (but the cuttings will stick to the magnet and the saw blade). Some magnets can actually be broken in half. But that leaves a "rough" end and is imprecise.
Then you will end up with two magnets, each half will be a new magnet, with both a north and a south pole. But the magnet will be weaker.
Parts that have the same charge will repel. Opposite charges attract/pull each other. So positive sides of magnets attract negatively charged magnets and repel positively charged magnets. Negative sides of magnets attract positively charged magnets and repel negatively charged magnets.
Magnets may not always attract if the opposite ends are not towards each other. For a magnet to work, the possitive end has to attract the negative end and visa versa. Failure of these ends meeting means the magnets will not work.
No. You'll end up with two smaller magnets, and each will have less than half the magnetic field strength of the original magnet.
The polarity of a magnet does not change if the magnet is cut into pieces. Each piece has the same polarity that it had before. In particular, if you break a bar magnet in half at the midline between the two poles, you will end up with two magnets N-S and N-S. No reversal of polarity occurs.
a norh pole and a south pole
a norh pole and a south pole
The magnetic flux has to go somewhere, so it simply flows around and back to the other pole. If you cut a magnet in half, each half will also end up with two poles for the same reason.
a norh pole and a south pole
Cutting a magnet in half can be done in a number of ways. A hack saw might work well (but the cuttings will stick to the magnet and the saw blade). Some magnets can actually be broken in half. But that leaves a "rough" end and is imprecise.
The ends of a magnet are called the poles.
Then you will end up with two magnets, each half will be a new magnet, with both a north and a south pole. But the magnet will be weaker.
Yes, cutting a magnet in half will make two magnets, one out of each half. The explanation of this lies in what gives the magnet its magnetic properties. When a magnet is made, small "volumes" of the metal matrix become magnets. These little spaces (called magnetic domains) are comprised of an atom or a few dozen atoms that have their magnetic axes aligned. The whole magnet is this way. That is why breaking it in half won't disrupt the vast majority of the magnetic domains. Each half of the broken magnet becomes a new magnet with a north and south pole.
Remembering the rule that opposites attract and sames repel, you can use the South end of one magnet to repel the South end of a second magnet. If the 2 magnets are aligned vertically and the repelling force is sufficient to push the weight of the upper magnet away, you have a very basic levitation.
Parts that have the same charge will repel. Opposite charges attract/pull each other. So positive sides of magnets attract negatively charged magnets and repel positively charged magnets. Negative sides of magnets attract positively charged magnets and repel negatively charged magnets.