To be aware of what air pressure you are inflating it to after the repair.
Tyler
tyler
Honestly Just Buy a New Tire, Fixing A Damaged Tire Can Lead to failure And Cause A Car Crash! To restore a flat tire, you could temporarily use Tire Flat to inflate air to get to a gas station. Then, if the flat is just because the tire is worn out it will need to be replaced. If it is due to a nail in the tire, the nail will be removed and the tire patched with vulcanized rubber.
because the propellant gas used to push the liquid sealant into the tire is flammable and explosive.
The picture for the tire pressure sensor is a sort of flat tire. On my 2000 is is right below the fuel gauge and the bottom of the 'flat' tire is \/\/\/\/ and the sides bulge out a bit.
To repair a flat tire you first need to remove the tire from the rim. Once removed inspect the tire for the damager and repair the puncture.
You need to purchase a tire pressure gauge. Using this, remove the dust cap on the tire valve and press the socket of the gauge firmly onto the open end of the valve. The gauge will show the tire pressure in the tire. After using the gauge replace the dust cap on the valve.
You did something wrong ! - Go back over ALL the work and double check everything.
If the tires are on the Jeep, then they are already locked. The lock key is only for removing the tires (for applying work to the car, e.g. Tire rotation, buying new tires, fixing a flat tire, etc.)
sounds like a flat spotted tire or a heavily cupped tire. runs hands around tire and check for weird wear on surface of tire. almost need more info as well.
If you are a long way from home and get a flat you need a spare to fit on .
ANY tire gauge measures air pressure in PSI.