You do not need special bolts. Standard bolts and screws, as long as they are the correct size, can be used.
I need the part that screws into the footboard to hold the post on
There are screws on the inside. You need to unscrew the screws.
I need a diagram of the headlight adjusting screws.
dont know we lost the screws moving
Screws need to be harder so they will not twist off when you apply torque to them.
Curtain rods are best mounted with screws. Usually the kit will contain all the screws you'll need for the job.
first u need a star screwdriver size 15....u need to take off all of the screws where the vents are then take the screws off under the vents...o yea there are screws on the side of the dash(u can get to them by opening the driver and passenger doors) and u need to take screws off in glove compartment
On some vehicles there is a caliper mounting bracket, on others the caliper screws directly to the steering knuckle.
the strength can be adjusted with the screws that you need to insert when cutting them out with the cutter on the buscuit surface
You will need a couple sizes mostly 4 inch ones.
The screws that fasten the panels under the dash of a 1994 Chevy Lumina are Phillips screws. After you remove the screws, you will need to pry the panel off carefully since there are clips that also hold the panel on.