HCl is a gas. It's therefore very difficult to accurately weigh out the proper amount to use to make a solution of any given concentration, and as the solution sits, some HCl may escape as gas.
In contrast, it's very easy to weigh out a solid base to high precision, and use a solution made from it to standardize the only-approximately-known HCl concentration.
HCl is a gas dissolved in water. It will not maintain its exact molarity over an extended period of time. To obtain accurate data, a freshly prepared solution of HCl must be standardized.
About 13M. You can assume it is 13M if you don't need an exact concentration (like if you need a ~1M HCl solution for an extraction or whatever) but if you need an exact concentration (for a titration, for example) then you will need to standardize your HCl first.
Add 200 mls of the 1.0N HCl solution to a 1 liter volumetric flask. Make up to the mark with water. Standardize against a known weight of Sodium Carbonate.
You cannot make HCL out from just Xhlorine. U will need Hydrogen to. Hcl is a Hydrochloric solution so u will need a method to combine Hydroger and chlorine in order to make HCL
If the solution is not a buffer, the HCl will react with the solution to form a product.
1N HCl is also 1M HCl because it is mono-protic. Therefore 36.5 g of HCl is required per liter or 3.65%. Simply take 100 g of 37% HCl and make up to the 1 liter mark on the volumetric flask. Check the value by titration against 1M NaOH. It should be perfect. If very slightly strong dilute very slightly (calculate) with water and re-standardize.
HCl is a gas. It's therefore very difficult to accurately weigh out the proper amount to use to make a solution of any given concentration, and as the solution sits, some HCl may escape as gas. In contrast, it's very easy to weigh out a solid base to high precision, and use a solution made from it to standardize the only-approximately-known HCl concentration.
About 13M. You can assume it is 13M if you don't need an exact concentration (like if you need a ~1M HCl solution for an extraction or whatever) but if you need an exact concentration (for a titration, for example) then you will need to standardize your HCl first.
Add 200 mls of the 1.0N HCl solution to a 1 liter volumetric flask. Make up to the mark with water. Standardize against a known weight of Sodium Carbonate.
You cannot make HCL out from just Xhlorine. U will need Hydrogen to. Hcl is a Hydrochloric solution so u will need a method to combine Hydroger and chlorine in order to make HCL
If the solution is not a buffer, the HCl will react with the solution to form a product.
1N HCl is also 1M HCl because it is mono-protic. Therefore 36.5 g of HCl is required per liter or 3.65%. Simply take 100 g of 37% HCl and make up to the 1 liter mark on the volumetric flask. Check the value by titration against 1M NaOH. It should be perfect. If very slightly strong dilute very slightly (calculate) with water and re-standardize.
Get two moles of HCl and add water until the solution is 1 L
(7 mL)(X M HCl) = (27.6 mL)(0.170 M NaOH)7X = 4.692X = 0.7 M HCl==========
If it is only HCL, yes.
HCl is ionozed in aq solution HCl + H2O = H3O(+ CHARGE) + Cl (- CHARGE) HCl FORMULA WILL REAMAIN HCl OT WILL BOT CHANGE
Molarity = moles of solute/liters of solution Molarity = 0.597 moles HCl/0.169 liters = 3.53 M HCl ------------------
Yes. HCl is a strong electrolyte.