You need to remove the negative (black) cable attached to whichever car's chassis, first.
Now if you accidently touch the chassis with the lead, nothing will happen, it's already negative. (This should be as far away from the battery as possible. ) Then, remove the other car's negative jumper.
Now, the positive sides can be taken off, safely, If you accidently touch the chassis with the leads, there will be no spark as the two chassis' are now isolated.
If you took off a positive (red) first, since the other end is still connected to a positive side of a battery and the two chassis' are connected, yYou could easily touch the chassis and make a spark, and possibly igniting any hydrogen gas from the battery, blowing its top off, and spraying sulfuric acid.
Engine won't start
As long as it is an induction 110 volt motor it can be reversed; if it is any other type of motor it cannot be reversed. You will have to get into the windings to bring both leads to the start in order to make it go in reverse. <<>> A split phase induction motor has two sets of coils and a centrifugal start switch. The start winding is in series with the start switch. The start winding provides a rotating magnetic field in one direction enabling the motor to start. The motor can be reversed by reversing the connections of either the start winding or the run winding but not both.
Start with the most recent event and work your way towards the one furthest in the past.
It is not possible to reverse the order of Gym Leaders in Pokemon Pearl. This is due to how the story of the game is written. And the fact that the 8th Gym Leader will be impossible to beat at the start of the game.
The cast of Start the Engine and Reverse - 2012 includes: Egor Kharlamov Lubov Novikova
A single phase induction motor has two sets of coils and a centrifugal start switch. The start winding is in series with the start switch. The start winding provides a rotating magnetic field in one direction enabling the motor to start. The motor can be reversed by reversing the connections of either the start winding or the run winding but not both.
if i am on my peorid when can i start trying for a baby
Start trying ...
Yes, You just have to select reverse gear before letting go the clutch.
It is not too early to start trying for a baby.
Stop trying to "get by" and start trying.
Start with number 1 cylinder in the same place as a standard rotation motor, then use the same firing order as the standard, but in a counterclockwise pattern. Just did this on mine and it works !!