answersLogoWhite

0


Best Answer

headlights and the brake switch are "hot" (always have power going to them)

they are on there own powersource,

the ignition is also on its own powersource, when you turn the key it pushes a lever forward contacting the switch inside the column, your question is vague,what don't you have ? cranking, power to ignition, troubleshooting is the key to fixing any vehicle... its a series of tests leading to fixing the problem

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why do you only have headlights and brake lights and no ignition?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you turn off the headlights on a 1996 buick regal?

That's a very good question, please Can someone answer it or is it that uncommon of a thing. 96Buick regal custom 3.1 Headlights are off when you have parking brake on and turn ignition over, but after you lift parking brake the only way to turn off the lights is to turn off the ignition fully.


Brake lights don't work when the brake is pushed. Work with headlights on only.?

The brake lights and the tail lights are separate circuits. Check the brake light fuse, then check the brake light bulbs, then check the brake light switch.


How do you turn off headlights in a 1998 Oldsmobile silhouette when it is running?

You can only turn off the headlights by applying the emergency brake. When the emergency brake is on, the headlights will not light. Otherwise the best of my expererience is that they are on all the time. If you have remote start, put the emergency brake on before you leave the vehicle and when you remote start it, the headlights will not be on, but the driving lights (if switch is on) will be on as well as the parking lights.


1999 trans am headlights come on when you turn the switch to park lights or lock the car how do you keep them down so only the park lights come on?

Just pull the parking brake up one click. It won't engage the brake, but it bypasses the headlights.


Why are your trailer brake lights staying on when you turn your headlights on?

First you need to understand that most, if not all, vehicle [autos, trucks, and trailers] rear lighting systems have both tail light bulbs and brake light bulbs, OR a single bulb on each side [right and left] that each have two filaments [what glows when electricity is applied]. The tail lights are supposed to be on when the headlights, or parking lights, in the towing vehicle are turned on. The separate brake light bulb, or brake light filament in the dual filament bulbs is only supposed to turn on when the brake pedal is depressed, and the towing vehicle brake lights are on. I suspect that what you are calling brake lights are actually the tail lights. To check this out, run some tests. Have an assistant sit in the vehicle and do the following on your command: 1. Apply brakes by pressing on the brake pedal. The brake lights should turn on. 2. With foot OFF of the brake, turn on the headlights. The trailer tail lights should turn on. 3. With the headlights on, have the assistant depress the break pedal. Even though the tail lights are already on, the brake lights should come on also, causing the trailer lights to brighten noticeably 4. While you're checking, have the assistant turn the ignition key to on, and one at a time test the left and right turn signals. Again, I think what you think are brake lights, are actually the tail ligts.


1990 Mercury Cougar won't start how can you jump or eliminate the switch on the brake?

Your brake light ignition switch should be replaced. It works your brake lights and ignition switch, so you do need it. It only costs about $7 dollars.


How can i fix a 1999 Pontiac sunfire that the tail lights and brake lights are not working but daytime runners and back window brake light works what is wrong?

On my 98 sunfire, the tail lights and marker lights only work if you turn on the headlights. If only the daytime lights are on, the Pontiac on the trunk is illuminated but no other lights at the rear until brakes or turn signals are activated. This is common with a lot of vehicles out there. Daytime running lights are not necessarily the same candle power as the headlights. I can tell a big difference in mine.


Does a 1999 suburban have automatic headlights?

Only the front lights stay on for safety. You need to turn on your lights to get the back lights to come on. To turn off the front safety lights just push your emergency brake on one click.


How do you turn headlights off while conditioner running in the car on a Kia Rio?

In this order only. Turn engine off. Depress parking brake. Turn engine on. Lights will turn off. To turn lights back on relase parking brake.


How can you turn your headlights off in darkness?

I assume you are asking about later model S10's that have the automatic photo sensor that turns the headlights on automatically when it gets dark The only way to get the lights off in darkness is to PARK, turn off ignition, set parking brake, and then re-start engine. Once you release the parking brake, the lights will come on. and while driving switch the manual control to headlighs on, press the dome override button back to back about 4 times and a ding will then signal manual headlights. just make sure your headlights are on cuz i was playing one night and blacked out on the highway.. haha


Mondeo brake lights on constantly?

Your parking/ side light/headlights switch not only rotates but also pulls out towards you thus switching your rear fog lights on. simply push switch in the way.


Why do my Bonneville headlights stay on even when I shut off the ignition?

the lights have a programmer they automatically stay on when u turn your car off, should only be on for a couple of minutes though, that's how the lights on my Bonneville work