The motor mounts should not keep breaking if they are installed properly. The delay in the transmission indicates it needs work, probably a rebuild.
The 2000 Mercury Villager does not have any loop points. Everything on the automobile is sealed. You do not need to worry about greasing your vehicle.
Not necessary on this vehicle.
The Vehicle Speed Sensor on the 1996 Mercury Villager is located on the back of the transmission (as you look at the vehicle from the front) on top of the transmission with a pair of wires leading away from it... best to reach it from under the vehicle.
There is no such thing on this vehicle.
On a Mercury Villager ( being a front wheel drive vehicle ) The transaxle ( transmission ) is located in the engine compartment to the drivers side of the engine
On a Mercury Villager , V6 engine : firewall 1-----3-----5 2-----4-----6 front of vehicle > driver
The distance a vehicle will travel between putting on the brakes and coming to a stop.
There is no such thing as an "oil level relay" on this vehicle.
This should not be necessary on this vehicle.
This is not possible on a modern vehicle like the Villager.
On a 1999 Mercury Villager , 3.3 litre V6 engine : firewall 1-----3-----5 2-----4-----6 front of vehicle > driver
The trans axle is the transmission on a front wheel drive vehicle