0
The brakelight switch, wiring, bulb holder(s) or bulb is shorting out.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Why would your breakes keep blowing the fuse?
It's probably your brake lights, not your brakes.
You keep blowing the brake light fuse in your focus?
Are both your brake lights blowing out? If it affects only one light: it could be a bad light socket, or a pinched or frayed wire that is shorting out.
What should you check for when the fuse for the rear brake lights keep blowing on a 1989 Honda CRX?
nothing, get it fixed by an auto electriction , there is a shortage somewhere
Why does the fuse to your dim lights keep blowing out in your spectra?
Chances are there is a short somewhere in the wiring
Why does your dash lights keep blowing fuse when turning dimmer switch up?
I suspect the switch is bad.
What would cause the fuse for the tail lights and dash to keep blowing in a 1994 Ford Explorer?
A short in the wiring.
Brake lights keep blowing fuse when turn signal light is on 1987 ford bronco?
Replace turn signal switch. Its grounding when you put turn signals on. I had the same problem and replaced it .Solved issues.
Why does the fuse for your tail keep blowing out after installing marker lights?
why does my turn signal light keep burning out and why is the sockets and plastic lens melted.
What would cause the brake horn fuse to keep blowing out on a 1993 Honda Civic LX?
A short circuit somewhere.
What is wrong with a 1994 Dodge Ram diesel when the fuse for the brake lights keep blowing?
There is a short to ground in the stop lamp circuit. The most common places for the short to be located are at either lamp, and at the trailer wiring(if equipped).
What would cause the fuse for the interior and tail lights on a 2001 dodge neon to keep blowing out?
A short in the wiring (grounding out)
1994 tracker that keeps blowing the fuse for the signal lights there is no short anywhere can the switch on the column cause this?
Yes that could be the cause. If you keep blowing a fuse, either you have a short, loose connection, too small a fuse, or the circuit is overloaded.
