why does my turn signal light keep burning out and why is the sockets and plastic lens melted.
A radio fuse might keep blowing if the radio itself needs an inline fuse in a 1997 Crown Victoria. It is possible that the radio and interior lights are not grounded properly. Installing an inline fuse between the radio and the fuse box may solve the problem of the fuse blowing.
horn/dv on my van. I'm having problems with a fuse blowing for my inside lights. horn/dv on my van. I'm having problems with a fuse blowing for my inside lights. horn/dv on my van. I'm having problems with a fuse blowing for my inside lights.
Same fuse as the tail light circuit.
It shouldn't have, or need, its own fuse. It should share a fuse with the marker lights <sometimes referred to as 'Park(ing) lights'>.
Circuit overloaded, short in wiring, or the fuse you are using is not the OEM correct fuse.
Short in the circuit, the circuit is overloaded, or you are installing too small a fuse.
tail light/marker light fuse see if your tail lights are working if they are you have problem in cluster most likely.
It's probably your brake lights, not your brakes.
Chances are there is a short somewhere in the wiring
Try looking at your tail light socket if it is fried that will blow the fuse
The license plate lights are not in a separate fuce by it seft. They are the same as your side marker lights. So, check if your side marker lights are working and if they are them is a bad license plate light bulb.
Check the park lamp fuse.