Want this question answered?
A thick Glass tumbler crack when hot water is poured into it,because the inside of the tumbler expands more rapidly than outside and causes strain in the glass As result of this a type of glass known as pyrex is used for making lab beakers and flask to avoid above effects.
A Pyrex dish is made out of a special type of glass so that it can be used in the oven or microwave. It is made out of soda-lime glass to withstand high temperature.
Unfortunately, this depends upon whose Pyrex you are considering. The original Pyrex was a borosilicate glass, which has a low thermal expansion. The Trademark owners have allowed the name to be used nowadays by some manufacturers who use tempered soda-lime glass. But some licensees still use a borosilicate glass.
The boiling water causes the inside surface of the thick glass to expand rapidly. But the outside of the glass expands at a much slower rate, as it takes time for the heat from the inside to reach the outside, and the expansion to equalise. It is this difference in expansion that can cause the glass to break.
The cover is lifted when the food is being boiled is due to the water evaporating and turning into gas. When water is evaporated into gas the gas requires more space than the water which increases pressure. This forces the container to open to increase the gases' available space.
A thick Glass tumbler crack when hot water is poured into it,because the inside of the tumbler expands more rapidly than outside and causes strain in the glass As result of this a type of glass known as pyrex is used for making lab beakers and flask to avoid above effects.
Pyrex is the trade name of a Corning low thermal expansion glass. All Pyrex is glass, not all glass is Pyrex.
I would have to say Pyrex
If the glass is warm then you can, however when I put boiling water into a cold glass it smashed so ... Yes you can put boiling water into a glass, just not a cold one (Y) Yes... but if the room (and the glass) is cold, expect bad results... You might get lucky though... When I have a cold, I mix the cold medicine with hot water in a glass, and only once in my life has the glass ever smashed in those circumstances... I rarely put hot water into glasses otherwise...
Pyrex is borosilicate glass and like all glass does not absorb any chemicals.
pyrex: a glass pipe fog: your drug of choice
Pyrex glass is designed to withstand sudden & drastic TEMPERATURE changes. Most glass will shatter with sudden temperature changes. Pyrex is not bulletproof. Most transparent bulletproof material (glass) is composed of several layers of plastic & glass sandwiched together. The plastic holds the glass together, while the glass absorbs a bullet's impact.
It's safe to drink water boiled in this glass IF no poisons have ever been put in the glassware. Borosilicate is the glass originally used to make Pyrex cookware--in Europe they still use it, but in the US a different glass is used that doesn't break as easily when dropped.
It is a glass formulated to resist thermal shock.
Only if it is Pyrex glass.
Pyrex is just a brand name of toughened, heat-resistant glass.
Direct exposure to firePutting it directly on an open flame. If you do it accidentally, let it cool thoroughly before using. I did it once, left it for 5 minutes, then poured room-temperature soup into it and it shattered. The same thing will happen if you put hot pyrex down in a wet (cool) sink. Also putting it directly onto a stove burner. My mother did this once by accident (forgetting the burner was hot) and it exploded, throwing glass shards all over the room. Very dangerous.Additional hazardsThere are a couple of other things you need to avoid. Shock will break Pyrex, just as it breaks any glass product. Glass is inherently brittle, and will not respond kindly to concentrated force. Lastly, if a Pyrex piece is scratched in the right way, it will break spontaneously. We often see older Pyrex wares with lots of little scratches in them. But a scratch presents what is called a stress riser in the glass. It is a place a break can "start" in that piece of Pyrex, and a scratch weakens the overall structure at that point. Dropping a heavy spoon into a scratched bowl might be all it takes to propagate a crack.