0
A superscalar architecture requires an on-board hardware scheduler which typically runs at twice the clock frequency and consumes a large amount of power. In contrast, VLIW scheduling is done by the compiler and no hardware scheduler is required therefore the power requirements tend to be lower.
What else can I help you with?
Difference bw semiconductor memory and magnetic memory?
1.semi conductor memory is faster,economical,smaller in size and lighter,but magnetic memories are slower compared to that. 2.semi conductor memories consumes less power,but mm consumes more power than that.
What is the advantage and disadvantage of Pentium 80586 microprocessor?
The Pentium 80586 microprocessor, often referred to as the Pentium, offered significant advantages such as improved performance with its superscalar architecture, enabling it to execute multiple instructions per clock cycle, and enhanced multimedia capabilities with built-in support for floating-point operations. However, a notable disadvantage was its relatively high power consumption and heat generation compared to later processors, which could lead to thermal management challenges. Additionally, its architecture became outdated as technology advanced, limiting its relevance in modern computing applications.
Why cmos consume low static power?
CMOS is a dynamic power consumer...whereas BJT consumes power always.... cmos consumes power only while switching from one astate to another state...i.e while switching
Which consumes more power 480 volts or 240 volts?
Voltage itself does not consume power; rather, power consumption is determined by the combination of voltage and current. If the power demand remains the same, a higher voltage system like 480 volts will require less current to deliver the same amount of power compared to a 240-volt system. So, in general, a 480-volt system would be more efficient in terms of power transmission compared to a 240-volt system.
How many volts are in a light?
There are no volts in a light. A light consumes power.
What are the differences between CMOS and MOS technology in terms of power consumption and performance?
CMOS technology consumes less power compared to MOS technology due to its ability to switch off transistors when not in use. This results in better energy efficiency. In terms of performance, CMOS technology generally offers faster operation and higher speed compared to MOS technology.
Is the radeon 7750 better then the 6850?
The 6850 is better but consumes more power.
Does LCD monitors take less power to run than plasma monitors?
in general, a plasma consumes more power.
How much power in watts does a monitor typically consume?
A typical monitor consumes around 25-30 watts of power.
What is a power rating?
A power rating is the amount of power a device consumes when operating at full capacity. Typical power ratings of ATX power supplies are 350W, 400W and 500W.
What is Power rated?
A power rating is the amount of power a device consumes when operating at full capacity. Typical power ratings of ATX power supplies are 350W, 400W and 500W.
Is it true that when a single phase motor that is being turned on and off repeatedly consumes more power?
Not always, but a motor often consumes more power as it is running up because the kinetic energy of the rotating parts has to be increased in this phase of operation.
