One reason a 1993 Chevy Lumina may turn over but not start could be the battery. It may also be the spark plugs.
No, Chevy Lumina Z34 ever came with a 3.7L engine. So probably not.....
Spark Plugs on a LuminaSee the related questions to the right. HOW DO YOU CHANGE THE SPARKS PLUGS ON A 1993 CHEVY LUMINA APV 3.8L 231-V6 ENGINE (an van)
Lumina in USA does not have a carburetor
The 1993 Chevy Lumina 3.1 liter engine timing belt can be found on the front of the engine. You will need to remove the front engine cover in order to access the timing belt.
I have a 1993 Chevy lumina van that has heat but doesn't have a fan how do I fix the fan?
Need to know if it is, or not,the coupe. Also, what engine.
your voltage reg is built into the alternator
To reset the computer in a 1993 Chevy Lumina with a 3.1L engine, you can disconnect the battery. Start by removing the negative battery cable and leaving it disconnected for about 15-30 minutes. This will clear the computer's memory and reset it. Afterward, reconnect the cable, ensuring it’s tight, and start the vehicle to allow the computer to relearn its parameters.
On a 1993 Chevy Lumina with a 3.1L engine, the crankshaft position sensor is located near the crankshaft pulley at the front of the engine. It is mounted on the engine block, typically on the passenger side. To access it, you may need to remove the engine cover or other components that obstruct the view.
1993 Chevy lumina: check all vacume lines for leaks and or splits around intake.AnswerIf you are not actually moving (just revving up the engine), it is normal for the engine stop at 4000 rpm. (governored)
The 1993 Chevrolet Lumina was offered as a sedan and in the APV minivan. Between the sedan and van it had four different engine options. In general the oil drain plug will be located on the oil pan. The exact location and style will depend on which model and engine Lumina you have.
123456