See if the holes in the metal grid are blocked so that the flames can not come up.
the pilot light in my fireplace is working but when i turn the switch on (new switch) it wouldn't fire up
SWITCH
check brake light switch
no it doesnt cause im hectic
It means 'operate the light-switch so as to cause the light to illuminate'.
.
If the fuel pump relay switch is bad then the fuel pump will not be turned on. Think of the relay like a light switch. If the switch has a bad connection then the light doesnt work.
Switch to a light source with a shorter wavelength.... Switch to a light source with a higher frequency
Probably a bad headlight switch. Also may be the power feed wire for the headlight switch. Check both.
Bad fuse or bad brake light switch.
I am having the same problem, possible one of two answers. It's either the switch or the valve. If you follow the cord from the switch it will have a black and a white wire attached to the gas valve under the fireplace. To rule out the switch as the problem take a ordinary paper clip and touch it to the two screws that the wires are attached to, thus completing the circuit and causing your fireplace to light. The other option is that it is the gas valve itself. when the valve is set to the on position and you flick the switch there are tiny little flappers inside the valve that open allowing the gas to flow though, sometimes they can be stuck shut if the fireplace has been sitting awhile. The best answer I got was to tap the sides and top of the valve with a screwdriver or wrench to jar them open. Other more unlikely options are that the gas valve is not set to "on", there is a on/off switch somewhere on the valve, or that your over all gas pressure in your house has been split to many ways and you don't have enough gas flow to actually run your fireplace.
The door switch for the VW Polo can go bad and cause the interior light to stay on. The switch must be changed, there is no way to repair it.