One of your front wheel hubs is bad and the ensor is sending a bad reading to the computer.
The repair will depend on what part of the cruise control is broken.
The cruise control fuse can be found in the fuse box. The cruise control fuse will be at the bottom of the first column.
check stop light
There is Not unfortunately :(
cruise control not working,u need to check the fuses also check the clutch safety switch as this also has to do with cruise control
No there is no light behind that switch
If the engine on the Santa Fe is missing, then the cruise control will not operate properly. The engine will have to run properly before the cruise can be fixed.
Cruise control is on...... activated by the buttons on the end of the indicator stalk - read your manual
The cruise is fed by the engine computer. If the engine runs, the fuse is not blown.
my check engine light stays on and the o/d light blinks....what could this mean?
Replace the cruise control deactivater switch which simply screws into the top of the master brake cylinder. Costs less than $20 and everything will run properly again! there is no deactivater switch on the master brake cylinder on a 2003 ford f-250
I had this same problem with my 2003 Venture. The Cheverolet dealership told me that the cruise contol is directly linked to the brake lights. The simplest and cheapest place to start would be to check your brake lights...if they are not working, you will not have cruise control.