It sounds like you need a new video card.
The first thing I would try is to hold down the menu button for 15 seconds. This should work but if it doesn't then try this: * Turn the computer and monitor off * Disconnect all monitor cabling from the monitor (power, USB, VGA, DVI, etc.) * Press and hold in the monitor power button in for 5 seconds * Reconnect the monitor to the computer * Reconnect the monitor power cord to the monitor * Turn on the monitor, then the computer * Press the Menu button for 15 seconds to unlock the padlock feature
notebook
You press the power button either on your laptop or monitor.
The resizing button changes the size of the screen that is seen on the computer monitor. It can be adjusted to any size with the maximum size being the size of the monitor.
A viewsonic tv monitor is a computer monitor that can also function as a tv even with the computer off. It works like a regular monitor that can be switched over to a tv at the press of a button.
The switch for the computer is separate to the monitor switch. To switch on the monitor, just press the button on the bottom right of your monitor (The thing you are looking into to see this answer).
when you press the start button and hold it for 6 seconds, the computer will shut down.
If its the monitor you are talking about then just press the "auto adjust" button, on the side of the monitor.
the monitor will have a power button on it. Depending on the type, it may be in different locations, but it shouldn't be hard to find. Turn that on.
A computer can not turn off by itself. The monitor just turns blank it you leave it. To turn off the computer you have to prees the on button on your computer. If you press the botton on the monitor it is not turning the computer off... just the screen.
maybe it's broken.push the power button?U may need a new monitor
You would find the "Auto Adjust" button on most of the monitors. The Auto Adjustment feature automatically adjusts the fine, coarse, and position on your monitor to the incoming video signal. The button is mostly located on the front of the monitor. If you are using the Digital (DVI or HDMI) connection on your monitor, Auto Adjust will not work. This function is applicable only if you are using a VGA cable to connect the monitor to a computer.