The abs light flickering on and off is caused by a problem in the abs system. Check the computer coeds to see if a problem shows. Check the abs sensors at each wheel.
Maybe 2 separate problems--hae vehicle scanned by a shop that has an ABS scanner
Turn the key off and the light resets. If it comes back on (except for bulb-test), that means a problem has already been detected again and needs to be repaired.
The abs light is on because there is a problem with the abs system. Have the system repaired and the light will clear itself.
Bring to a shop that has an ABS scanner to determine the problem
could b your abs sensor in you front cv joint`s
after fixing the whatever abs problems or traction control problems you had the light should go off automatically. if it does not you have not fixed the problem.
sounds to me like a wheel bearing is going..... 2000 and 2001 gm wheel bearings are NOTORIOUS for them to go. does it sound like your car is going to take off like a space shuttle? they make odd noises
if the abs light does not go off, try disconnecting battery for 5 minutes then reconnecting.this will usually reset computer.if this does not work, there is still a problem in brake system
shut off abs light on 1998 es300
The abs light stays on when there is a failure. It can not be shut off until the problem is fixed. The trouble code in the computer is read with a scan tool.The abs light stays on when there is a failure. It can not be shut off until the problem is fixed. The trouble code in the computer is read with a scan tool.
Trhe TRAC warning light is usually caused by a problem in the ABS system. See the link TRAC OFF DESCRIPTION link below for more info.- TechJK --------------------
The abs light is on because there is a problem with the abs system. The light will not go off until the problem is fixed.