Your ignition switch has failed. There is a good chance that the wiring plug for the switch has melted slightly due to a blower motor that is pulling too many amps. You will have to replace the switch, plug, and blower motor.
pushing
pulling
pulling
Pushing.
Pushing and Pulling differ like Positive and Negative directions.
a spring balance is used to measure a pushing or pulling force.
pulling
No, they are forces
Yes.
Pushing
There are several things that can cause a key to get stuck in the ignition. You can try turning the steering wheel a bit to the left or right to see if that allows it to release. Also, try pushing the key in a bit more and turn it to the lock position, then try pulling it out. Don't force the key or it could break off in the ignition.
pushing