answersLogoWhite

0


Best Answer

The discharge line does not go back to the evaporator but instead it goes to the a/c condenser......

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why does the discharge side of compressor theline returning to the evap?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

If you replace your compressor do you also have to replace the evap coils?

Absolutely not.


How can you save freon when replacing the evaporator coil?

You can save some of it by: Close condenser valve to evap coil - Use guages to prevent exceeded max pressure. Run compressor to store gas in condenser. Cut off evap return line at compresser. Replace evap.


Where is the ac unit located at in a 2002 Chrysler concord?

what part of the system? evap. blower motor in car. compressor dryer orfice hose assembly condensor under hood


Where is the evaporator core located on a Jeep Cherokee?

behind the dash on the passenger side. Not worth the hassle -- there are forums that teach you to change your air compressor for the AC into an air compressor - fill tires, rafts, beds etc! google it!


Where is the evap system on rx8 2004?

Evap pump


What is an EVAP port?

An EVAP system is the system in the car that retrieves fuel vapors from the gas tank, as well as the rest of the fuel system. The EVAP system will then recycle these vapors so they can be burned in the engine. The EVAP port is a test port where a vacuum can be attached to check for leaks in the EVAP system.


Where is the EVAP control valve on the 2000 Honda Odyssey?

The evap control valve is on the cannister


Will a 4 ton condenser unit work with a 3 ton furnace?

not very well. a 4 ton system needs about 1600 cfm to provide it's full capacity of cooling. a 3 ton furnace puts out about 1200 cfm. in addition, the evap coil typically attached to the furnace needs to match the tonnage of the outdoor unit. so, the evap coil must be 4 tons. If you currently have a 3 ton furnace and evap coil, the system will not work, and you will most likely ruin the compressor in the outdoor unit.


What is EVAP code p0443 in 97 Ford Explorer?

P0443 - EVAP control system CANISTER PURGE VALVE CIRCUIT MALFUNCTION - VPWR circuit open - Evap canister purge valve circuit shorted to ground - damaged EVAP canister purge valve - EVAP canister purge valve circuit open - EVAP canister purge valve circuit shorted to VPWR - damaged PCM


What do Evap Control Canister do on your car?

The Evap canister (charcoal canister ) collects fuel vapour until it is drawn into the intake system when the evap solenoid is operated by the ECU


Can you lay a sub zero refrigerator on its back?

It can be done, but I would not. For transportation with no other option, yes. If you do move it this way, do not turn it on for a few hours. The oil inside the compressor will flow into the system and will need to drain back into the compressor. If you have to lay it down, do so for as brief a period as possible. Oil inside the coil, evap and condenser are all bad for the system.


Where is evap canister on 2003 Hyundai Sonata?

where is evap canister on 2003 Hyundai sonataType your answer here...